Siemens

BAS-3051

16-ch DI Expansion Module
		Main Features Unique IO design for local & remote IO Supports 1 kHz counter input and 1 kHz frequency input (2 channels)

Introduction
BAS-3050/BAS-3051 expansion I/O modules can be stacked on the DDC controller, or can serve as remote standalone I/O modules through an RS-485 network. These expansion I/O modules add both scalability and flexibility to Advantech BAS-3000 solutions. Like the DDC, I/O expansion modules can be programmed using the BASPro programming tool.
Specifications
Part Number		BAS-3051-AE
General	Description	16-ch DI Expansion Module
Power	Input	24 VDC, 24 VAC
Universal Input	Number of Inputs	-
Universal Input	Resolution	-
Analog Output	Number of Outputs	-
Analog Output	Resolution	-
Digital Input	Number of Inputs	16
	Logic High	Close
	Logic Low	Open
Digital Output	Number of Outputs	8
Protection	Isolation Voltage	3,000 VDC
Protocol	Expansion module	Local Bus
Protocol	BACnet Remote I/O	-

BAS-3520

20-ch Web-enabled DDC Controller
		Main Features Standalone programmable controller BASPro programming software provides BA domain function (scheduler, HVAC calculation, sequence…) Auto-tuning PID control Calendar schedule control Alarm and event notifications Provide RS-485 to connect with remote I/O devices Up to 3 Local I/O Expansion Modules Remote programming and maintenance through Ethernet LCM display (optional)

Introduction
BAS-3512/3520 is a standalone programmable controller specially designed for building automation applications. Designed as a typical DDC (Direct Digital Controller), BAS-3512/3520 delivers various of onboard I/O including universal input, analog output, digital input and digital output, providing flexible options to satisfy versatile application requirements. It also features powerful BASPro programming tool for engineers to quickly develop their application. BASPro delivers many function blocks suitable for BA application, such as scheduler, HVAC calculation, sequential control, PID control, alarm, and event. Its compact size makes it an ideal solution to fulfill BA installation environment. The I/O expansion modules (BAS-3018, BAS-3024, BAS-3050 and BAS-3051) provide more I/O points and make the system a scalable solution.
Specifications
Part Number		BAS-3520-AE
Analog Output	Channles	4
Communications	Communication Protocol	Modbus/TCP, Modbus/RTU
	LAN	1 x 10/100Base-T (RJ-45)
	RS-485	1 (isolated)
Digital Input	Channles	8
Digital Output	Channels	4 (Source Type)
Environment	Operating Humidity	20 ~ 95% (Non-condensing)
Environment	Operating Temperature	-10 ~ 60° C
General	Power Input	24 VDC/24 VAC
Universal Input	Channels 4	4

DMU-3010

8-ch AI, 8-ch DI, 4-ch DO Ethernet I/O Module
		Main Features Industrial Modbus/TCP protocol Mixed I/O in the Module Advantech Domain Focused Configuration Tool Remote maintenance through Ethernet Supports online device auto-scan or manual configure function Auto push data to specification target function Supports High/Low Alarm function Support cable burn-out check Support pulse /accumulator input....

Introduction
DMU-3010 is an Ethernet I/O module that supports the Modbus TCP protocol. DMU-3010 delivers various onboard I/Os including analog input, digital input, and digital output, providing flexible options to satisfy versatile application requirements. It also features the powerful Advantech Domain Focused Configuration Tool for engineers to quickly develop their applications.
Specifications
Part Number		DMU-3010-AE
General	Dimensions (W x H x D)	120 x 120 x 44 mm (4.72" x 4.72" x 1.73")
	LAN	10/100Base-T
	Connectors	1xRJ-45 (LAN), 4x Plug-in screw terminal block (I/O & Power)
	Watchdog	System (1.6 sec)
	Supported Protocols	Modbus/TCP
	Power Input	10 ~ 30 VDC
	Power Consumption	11 - 26
Analog Input	Channels	8
	Input Type	V, mA1, RTD2
	Voltage Range	0~10V
	Current Range	0~20 mA, 4~20 mA
	Input Impedance	2MO (voltage)
	Accuracy	±0.1%, (voltage); ±0.2% (current); ±0.5° C (RTD); or Better
	Span Drift	±25 ppm/° C
	Zero Drift	±6 µV/° C
	Resolution	16 bits
	Sampling Rate	10 samples/second
	CMR @ 50/60 Hz	90 dB
	NMR @ 50/60 Hz	60 dB
Digital Input	Channles	8
Digital Input	Isolation Protection	2500 VDC
Digital Output	Channels	4
	Power Dissipation	300 mW for each channel
	PWM Period	20ms~3600sec
	Isolation Protection	2500 VDC
Environment	Humidity	5-95% RH
	Operating Temperature	-40 ~ 70°C (-40 ~ 158°F)
	Storage Temperature	-40 ~ 70° C (-40 ~ 158° F)

Web-enabled DDC & I/O Modules

Advantech DDC (Direct Digital Controller) are powerful integrated field controllers suitable for building automation applications. Through various onboard I/Os and expansion IO modules, they provide versatile options to satisfy a wide range of application requirements. Their compact size makes them an ideal solution to fulfill BA applications. Advantech DDC features BASPro, an easy-to-use graphical programming tool that helps engineers develop applications quickly. BASPro delivers many function blocks suitable for BA applications, such as scheduler, HVAC calculation, sequential control, PID control, alarm, message, etc

Description
Model Number		Description
BAS-3018		8-ch UI Expansion Module

BAS-3024		4-ch UI, 4-ch AO, 4-ch DO Expansion Module

BAS-3050		8-ch DI, 8-ch DO Expansion Module

BAS-3051		16-ch DI Expansion Module

BAS-3060		8-ch DO Relay Expansion Module

BAS-3512		12-ch Web-enabled DDC Controller

BAS-3520		20-ch Web-enabled DDC Controller

DMU-3010		8-ch AI, 8-ch DI, 4-ch DO Ethernet I/O Module

Address

Call us on

Mail us @

BAS-3051

BAS-3520

DMU-3010

Web-enabled DDC & I/O Modules

More Articles ...

SIMATIC S7-300

SIMATIC S7-1200

SIMATIC S7-1500

SIMATIC S7-400

SIMATIC HMI