• Address

    C-188, Sector 31-D, P&T Society,

    Korangi Industrial Area,

    Karachi-74900,

    Pakistan

     

  • Call us on

     +92-21-35070751

     +92-300-5776703

  • Mail us @

    info@pakplc.com

     

ADAM-4019+

8-ch Universal Analog Input Module with Modbus
 


Main Features

  • Supports 4~20 mA
  • Software configurable for mV, V, mA or Thermocouple inputs
  • 16-bit resolution
  • Isolation voltage 3000 VDC
  • Supports Modbus/RTU Protocol
  • Burn-out detection function
 
Introduction


ADAM-4019+ is an 8-channel Universal Analog Input Module. The new module improves over its predecessor ADAM-4019 with a 4~20 mA input range, and a burnout detection function. Its mixed input range design supports individual configuration for each channel to save costs and space in applications. The other frequently used input ranges include +/-10V, mV, and thermocouple, which are all well-integrated in this model. It also supports burnout detection so that any sensor failures can be detected in advance. For easier control, ADAM-4019+ provides not only ADAM ASCII commands, but also the Modbus/RTU protocol for satisfying different application demands.
Specifications
Part Number ADAM-4019+-AE
Analog Input Burn-out Detection Yes 
(4 - 20 mA & AII T/C)
Channel 
Independent 
Configuration		 N/A
Current Input 4 - 20 mA 
±20 mA
Direct Sensor 
Input		 J, K, T, E, R , S, B 
Thermocouple
Voltage Input ±100 mV 
±500 mV 
±1 V 
±2.5 V 
±5 V 
±10 V
Analog Output Current Output -
Voltage Output -
Digital I/O Digital Input 
Channel		 -
Digital Ouput 
Channel		 -
Other Isolation 3000 VDC

ADAM-4021

1-ch Analog Output Module


Main Features

  • Output type: mA, V
  • Output range: 0 ~ 20 mA, 4 ~ 20 mA, 0 ~ 10 V
  • Isolation voltage: 3000 V DC
 
Introduction


Analog output module receives its digital input through an RS-485 interface from the host computer. The format of the data is either engineering units, twos complement hexadecimal format or percentage of full-scale range (FSR),depending on the module 's configuration. It then uses its microprocessor-controlled D/A converter to convert the digital data into output signals. You get a true readback of the analog output signal from the unit 's ADC, which independently monitors the output. You can specify slew rates and start up currents through the configuration software. The Analog Output Module can supply single-channel analog output in a range of voltages or currents. They protect your equipment from ground loops and power surges by providing opto-isolation of the D/A output. The transformer based isolation is up to 3000 VDC.
Specifications
Part Number ADAM-4021-DE
Analog Input Burn-out Detection -
Channel 
Independent 
Configuration		 -
Current Input -
Direct Sensor 
Input		 -
Voltage Input -
Analog Output Current Output 0 - 20 mA, 
4 - 20 mA
Voltage Output 0 - 10 V
Digital I/O Digital Input 
Channel		 -
Digital Ouput 
Channel		 -
Other Isolation 3000 VDC

ADAM-4024

4-ch Analog Output Module with Modbus


Main Features

  • 12-bit resolution
  • Software configurable for mA or V output in individual channels
  • 4 digital inputs for latch output
  • 3000 VDC D/A to Logic isolation
  • Programmable output slope: 0.125 - 128.0 mA/sec. 0.0625 - 64 V/sec.
 
Introduction


ADAM-4024 provides 4 universal type output channels. Moreover, it is designed with 4 Digital inputs for integrating applications, such as emergency latch outputs or users default triggers. It uses optical isolators to prevent ground loop effects and limits damages from power surges. You can specify slew rates and startup currents.
Specifications
Part Number ADAM-4024-B1E
Analog Input Burn-out 
Detection		 -
Channel 
Independent 
Configuration		 -
Current Input -
Direct Sensor 
Input		 -
Voltage Input -
Analog Output Current Output 0 - 20 mA, 
4 - 20 mA
Voltage Output ±10 V
Digital I/O Digital Input 
Channel		 4
Digital Ouput 
Channel		 -
Other Isolation 3000 VDC

ADAM-4022T

2-ch Serial Based Dual Loop PID Controller with Modbus


Main Features

  • Channels: 4
  • Input Type: mA, V, Thermistor, RTD
  • Input Range: 0 to 20 mA, 4 to 20 mA, 0 to 10 V
  • Watchdog Timer
 
Introduction


The ADAM-4022T dual loop PID controller is a Serial-based controller. It was designed as the product of Advantech's ADAM-4000 series with Serial based PID controller. With an excellent accuracy ±0.15%, the ADAM-4022T is an ideal controller for temperature and other processing variable in heating and cooling applications and environmental tests. ADAM-4022T utility software can help you select input and range configurations, set the operating parameter (SP, Sv, Pv ….. etc) for your process control needed. ADAM-4022T utility software also integrates the trend chart to help you monitor and debug your control setting. ADAM-4022T was designed to use in industrial environment. It can be installed on the standard DIN rail inside the cabinet. And it can be powered by unregulated 10~30Vdc to meet the various power supplied source in field. It also withstands ambient temperature up to 60 o C and resists the effects of vibration and mechanical shock. 
Specifications
Part Number ADAM-4022T-AE
General Built-in I/O -
Comm. Distance Serial: 1.2 km
Comm. Protocol ASCII Command/Modbus
Comm. Speed Serial: From 1,200 to 115.2 k
Data Flow 
Control		 Yes
Interface 
Connectors		 RS-485: plug-in screw terminal
Isolation Voltage 3000 VDC
Network RS-485
Watchdog Timer Yes

ADAM-4050

15-ch Digital I/O Module


Main Features

  • 7 input channels, 8 output channels
  • Watchdog Timer
 
Introduction


The ADAM-4050 features seven digital input channels and eight digital output channels. The outputs are open-collector transistor switches that you can control from the host computer. You can also use the switches to control solid-state relays, which in turn can control heaters, pumps and power equipment. The host computer can use the module's digital inputs to determine the state of limit or safety switches or remote digital signals.
Specifications
Part Number ADAM-4050-DE
Digital Input Channles 7
Input Voltage -
Digital Output Channels 8
Power Dissipation 300 mW
General Isolation -
Watchdog Timer Yes (System)

More Articles ...

  1. ADAM-4051
  2. ADAM-4052
  3. ADAM-4053
  4. ADAM-4055
Page 91 of 156

Services and Support

Leveraging Factory Automation to Improve Processes and Operations

In the manufacturing world, business success depends on your ability to employ your assets in a way that delivers maximum return. But it can be a real challenge to use existing systems to increase output, improve product quality, ensure safety and comply with regulatory requirements.

C&M understands that improving the efficiency of your assets involves more than implementing new technologies. We can help you upgrade or use your existing systems and infrastructure to enhance your plant-centric processes and operations for stronger business performance. From automation controls to complete factory automation and main automation contractor services, C&M has the automation consultants, specialists and control engineers on staff to deliver.

Every project benefits from our deep experience in a variety of industries and technologies. Our proven execution methodology ensures that we implement solutions in a safe, cost-effective and timely manner, meeting or exceeding all your project goals. Our automation solutions are platform-independent, scalable and sustainable, allowing you to continue experiencing benefits as you grow. Enjoy greater efficiency, reliability and predictability on your plant floor with C&M.

C&M’s automation solutions can help you:

  • Identify suboptimized operations — Conduct studies, audits and long-term assessments to pinpoint bottlenecks and help quantify opportunities for improvement.
  • Make better decisions — Implement C&M’s industrial automation solutions to coordinate the right process controls with the most critical process information, all so you can make the best decisions for your organization.
  • Improve plant efficiency, quality and safety — Depend on C&M’s process automation solutions to streamline production, ensure quality control and minimize risk of injury in your facility.
  • Ensure success for your DCS Conversion — Get the support you need for a smooth DCS migration.
  • Boost productivity — Look to our process automation services to reduce variability, ensure system reliability and reduce maintenance downtime. Special capabilities include PID tuning, FEED engineering, construction automation, batch automation, optimizing your industrial network systems and more.
  • Deploy the right solution for your facility — Depend on C&M’s design standards and best-practices expertise to develop the right automation engineering solutions for your needs, with complete documentation.
  • Ensure regulatory compliance — Implement process validation and validated systems for ensured compliance with industry regulations and best practices.

 

 

Installation

Installation and Commissioning

C&M is an ideal partner for installation and commissioning of your machine or plant. 

Designing

Designing Services

We are leading Systems Integrator providing integrated engineering solutions, systems and services that address the needs of today.

repair services

Controls Repair

Factory repair, and partial or complete reconditioning of all kinds of electronic control systems.

On Site Troubleshooting

On-Site Troubleshooting

Our field support engineers assist your maintenance staff with troubleshooting, preventive and reactive maintenance tasks.

Retrofit Controls

Retrofit Controls

Evolve, upgrade or migrate to a new generation of hardware and software, and extend the life of your equipment.

Assessment Services

Assessment Services

Safety Assessments help you comply with current and emerging standards by providing consulting services for safety critical controls.