Description

Communication processors are used for connecting S7-400 to the different bussystems / communication networks as well for point-to- point link.

Point-to-point connection
Point-to-point link via communications processors (CPs) is an extremely powerful and low-cost alternative to bus systems. The advantage of point-to-point links over bus systems is especially pronounced when only a few (RS 485) devices are to be connected to the SIMATIC S7.
The CPs can also easily link third-party systems to the SIMATIC S7. Thanks to the great flexibility of the CPs, different physical transmission media, transmission rates or even customized transmission protocols can be implemented. For each CP, there is a configuring package on CD with electronic manual, parameterization screen forms and standard function blocks for communication between the CPU and the CP. The configuration data are stored in a system block and backed up in the CPU. When modules are replaced, the new module is therefore immediately ready for use.
With the S7-400 point-to-point link modules, adaptation to the physical transmission media is achieved by plugging in the relevant interface submodules, without the need for external converters.

Applications

Communication modules allow connection of the SIMATIC S7-400 for instance to:

• SIMATIC S7 and SIMATIC S5 programmable controllers, and systems from many other manufacturers

• PCs, programming devices, hmi devices

• Field devices

• Scanners, bar code readers

• Measuring systems

• Scales, etc.

Benefit

• Reduced start-up times due to the easy configuration with STEP 7
• Reduced downtimes and service times in the event of a fault through LED displays

Design and function

The CPs have a rugged plastic housing with LEDs for displaying operating states and faults. They show all advantages of the SIMATIC S7-300- Design, e.g.
• Compact design
• Easy installation
• User friendly wiring, etc.

6ES7440-1CS00-0YE0

SIMATIC S7-400, coupling module CP 440-1 for point-to-point connections, 1 channel incl. configuration package on CD

6ES7441-1AA05-0AE0

SIMATIC S7-400, coupling module CP 441-1 for point-to-point connections, 1 channel incl. configuration package on CD

6GK7443-5FX02-0XE0

Communications processor CP 443-5 Basic for connection of SIMATIC S7-400 to PROFIBUS FMS, S5-compatible, PG/OP and S7 communication

6GK7443-5DX05-0XE0

Communications processor CP 443-5 Extended for connection of SIMATIC S7-400 to PROFIBUS DP, S5-compatible, PG/OP and S7 communication

6GK7443-1EX30-0XE0

Communications processor CP 443-1; 2x 10/100 Mbit/s (IE switch); RJ45 ports; ISO; TCP; UDP; PROFINET IO controller; S7 communication; Open communication (SEND/ RECEIVE); S7 routing; IP configuration via DHCP/ Block; IP Access Control List; Time synchronization; extended web diagnostics; Fast Startup; Support for PROFIenergy;

6GK7443-1GX30-0XE0

Communications processor CP 443-1 Advanced 1x 10/100/1000 Mbit/s, 4x 10/100 Mbit/s (IE switch) RJ45 ports; ISO; TCP; UDP; PROFINET IO controller; S7 communication; Open Communication (SEND/RECEIVE); S7 routing; IP configuration via DHCP/block; IP Access Control List; Time synchronization; extended web diagnostics; Fast Startup; PROFIenergy support; IP routing; FTP; Web server; E-mail; PROFINET CBA, security

6GK7443-1UX00-0XE0

Communications processor CP 443-1 OPC UA; 1x 10/100/1000 Mbit/s RJ 45 port; OPC UA communic. (Data Access). Operation as OPC UA server Operation as OPC UA client via Programmable user block according to PLCopen, OPC UA-compliant security mechanisms Programming device communication Time synchronization Web diagnostics OPC UA server Certification

6NH7800-4BA00

SINAUT ST7, TIM 4R-IE communication module for SIMATIC S7-300, S7-400, PC; with two RS232/RS485 interfaces for SINAUT Communication via standard WAN and two RJ45 interfaces for SINAUT communication via IP-based networks (WAN or LAN)

6NH7803-4BA00-0AA0

TIM 4R-IE DNP3 communication module for SIMATIC S7-300, S7-400, PC; with two RS232/RS485 Interfaces for DNP3- Communication via standard WAN and two RJ45 interfaces for DNP3 communication via IP-based networks (WAN or LAN)

6GK5875-0AA10-1AA2

SCALANCE M875-0 UMTS router; for wireless IP communication from Ethernet- based automation devices via UMTS mobile radio HSDPA and HSUPA support Security features: IPsec, Firewall; for mobile applications with approvals for railway and vehicels; 1x digital input, 1x digital output; observe national approvals!

Technical data