• Address

    C-188, Sector 31-D, P&T Society,

    Korangi Industrial Area,

    Karachi-74900,

    Pakistan

     

  • Call us on

     +92-21-35070751

     +92-300-5776703

  • Mail us @

    info@pakplc.com

     

EKI-1526

4-port RS-232/422/485 Serial Device Server


Main Features

  • 16-port RS-232/422/485 serial communication
  • Provides 2 x 10/100 Mbps Ethernet ports for LAN redundancy
  • Supports up to 921.6 kbps, and any baud rate setting
  • Provides COM port redirection (Virtual COM), TCP and UDP operation modes
  • Provides rich configuration methods: Windows utility, Telnet console, Web Browser, and serial console
  • Built-in 15 KV ESD protection for all serial signals
  • SNMP MIB-II for network management
  • Built-in buzzer for easy location
  • Standard 1U rackmount size
  • Rear wiring
  • Automatic RS-485 data flow control
 
Introduction


EKI-1528 and EKI-1526 are industrial-grade network-based serial device servers for connecting up to 8 or 16 serial RS-232/422/485 devices, such as CNCs, PLCs, scales and scanners, directly to a TCP/IP network. The EKI-1528 and EKI-1526 feature two independent Ethernet ports and MAC addresses to provide a redundant network mechanism to guarantee Ethernet network reliability. The EKI-1528 and EKI-1526 provide a simple and cost-effective way to bring the advantages of remote management and data accessibility to thousand of devices that can't connect to an Ethernet network. The EKI-1528 and EKI-1526 offer rich ways to configure through Windows utility, Web Browser, serial console or Telnet console, these methods make it easy manage many EKI-1528 and EKI-1526 or serial devices on your network.
Specifications
Part Number EKI-1526-AE
Connector Ethernet RJ45
Serial RJ45
Ethernet Interface 10/100 Mbps
Ports 2
Serial Ports 16
Type RS-232/422/485
Software Baud Rate 50 ~ 921.6 Kbps
Driver Windows 2000/XP/Vista (x86)
Operating Mode Virtual COM, 
TCP/UDP server 
TCP/UDP client 
Pair connection

ADAM-4570

2-port RS-232/422/485 Serial Device Server


Main Features

  • Supports RS-232/422/485 serial communications
  • Provides 10/100 Mbps auto-sensing Ethernet port
  • Supports baud rate up to 921.6 kbps
  • Provides COM port redirection (Virtual COM), TCP and UDP operation modes
  • Allows a max. of 5 hosts to access one serial port
  • Allows a max. of 16 hosts to be accessed as TCP client mode
  • Supports auto re-connection function
  • Supports Windows 2000/XP/Vista drivers
  • Built-in 15 KV ESD protection for all serial signals
  • Automatic RS-485 data flow control
  • Supports remote update firmware
 
Introduction


ADAM-4571 and ADAM-4571L are fast and cost effective data gateways between serial and Ethernet interfaces. The units also bring the advantages of remote management and dataaccessibility to RS-232/422/485 devices. The transmission speed of the units is up to 230 kbps, meeting the demands for high-speed data exchanges. In addition, you can useWindows utility to configure ADAM-4571 and ADAM-4571L without further programming. The units not only protect your current hardware investment but also ensure future networkexpandability. Since the protocol conversion is transparent, all your existing devices can be seamlessly integrated with an Ethernet network. Therefore, ADAM-4571 and ADAM-4571Lcan be used in security systems, factory automation, SCADA, transportation and more. ADAM-4571 and ADAM4571L link both your existing human-machine interface(HMI) PC andyour RS-232/422/485 devices with Ethernet cables.ADAM-4571 and ADAM-4571L come with a Windows configuration and port-mapping utility. The configuration tool can auto-detect all Ethernet Data Gateway devices on the localnetwork, and let you adjust all settings. The port mapping utility helps you to setup up COM ports for Windows NT/2000/XP platform. This helps you configure all ports to meetyour needs.
Specifications
Part Number ADAM-4570-BE
Connector Ethernet RJ45
Serial RJ48
Ethernet Interface 10/100 Mbps
Ports 1
Serial Ports 2
Type RS-232/422/485
Software Baud Rate 50 ~ 921.6 Kbps
Driver Windows 
2000/XP/Vista
Operating Mode Virtual COM, Data 
Mode, Control 
Mode

ADAM-4571

1-port RS-232/422/485 Serial Device Server


Main Features

  • Supports RS-232/422/485 serial communication
  • Provides 10/100 Mbps auto-sensing Ethernet port
  • Supports baud rate up to 921.6 kbps
  • Provides COM port redirection (Virtual COM), TCP and UDP operation modes
  • Allows a max. of 5 hosts to access one serial port
  • Allows a max. of 16 hosts to be accessed as TCP client mode
  • Supports auto re-connection function
  • Supports Windows 2000/XP/Vista drivers
  • Built-in 15 KV ESD protection for all serial signals
  • Automatic RS-485 data flow control
  • Supports remote update firmware
 
Introduction


ADAM-4571 and ADAM-4571L are fast and cost effective data gateways between serial and Ethernet interfaces. The units also bring the advantages of remote management and dataaccessibility to RS-232/422/485 devices. The transmission speed of the units is up to 230 kbps, meeting the demands for high-speed data exchanges. In addition, you can useWindows utility to configure ADAM-4571 and ADAM-4571L without further programming. The units not only protect your current hardware investment but also ensure future networkexpandability. Since the protocol conversion is transparent, all your existing devices can be seamlessly integrated with an Ethernet network. Therefore, ADAM-4571 and ADAM-4571Lcan be used in security systems, factory automation, SCADA, transportation and more. ADAM-4571 and ADAM4571L link both your existing human-machine interface(HMI) PC andyour RS-232/422/485 devices with Ethernet cables.ADAM-4571 and ADAM-4571L come with a Windows configuration and port-mapping utility. The configuration tool can auto-detect all Ethernet Data Gateway devices on the localnetwork, and let you adjust all settings. The port mapping utility helps you to setup up COM ports for Windows NT/2000/XP platform. This helps you configure all ports to meet
Specifications
Part Number ADAM-4571-BE
Connector Ethernet RJ45
Serial DB9
Ethernet Interface 10/100 Mbps
Ports 1
Serial Ports 1
Type RS-232/422/485
Software Baud Rate 50 ~ 921.6 Kbps
Driver Windows 
2000/XP/Vista
Operating Mode Virtual COM, Data 
Mode, Control 
Mode

ADAM-4570L

2-port RS-232 Serial Device Server


Main Features

  • Supports RS-232 serial communication
  • Provides 10/100 Mbps auto-sensing Ethernet port
  • Supports baud rate up to 921.6 kbps
  • Provides COM port redirection (Virtual COM) mode
  • Allows a max. of 5 hosts to access one serial port
  • Supports auto re-connection function
  • Supports Windows 2000/XP/Vista drivers
  • Built-in 15 KV ESD protection for all serial signals
  • Supports remote update firmware
 
Introduction


ADAM-4571 and ADAM-4571L are fast and cost effective data gateways between serial and Ethernet interfaces. The units also bring the advantages of remote management and dataaccessibility to RS-232/422/485 devices. The transmission speed of the units is up to 230 kbps, meeting the demands for high-speed data exchanges. In addition, you can useWindows utility to configure ADAM-4571 and ADAM-4571L without further programming. The units not only protect your current hardware investment but also ensure future networkexpandability. Since the protocol conversion is transparent, all your existing devices can be seamlessly integrated with an Ethernet network. Therefore, ADAM-4571 and ADAM-4571Lcan be used in security systems, factory automation, SCADA, transportation and more. ADAM-4571 and ADAM4571L link both your existing human-machine interface(HMI) PC andyour RS-232/422/485 devices with Ethernet cables.ADAM-4571 and ADAM-4571L come with a Windows configuration and port-mapping utility. The configuration tool can auto-detect all Ethernet Data Gateway devices on the localnetwork, and let you adjust all settings. The port mapping utility helps you to setup up COM ports for Windows NT/2000/XP platform. This helps you configure all ports to meetyour needs.
Specifications
Part Number ADAM-4570L-CE
Connector Ethernet RJ45
Serial RJ48

Ethernet

Interface

 10/100 Mbps
Ports 1
Serial Ports 2
Type RS-232
Software Baud Rate 50 ~ 921.6 Kbps
Driver Windows 
2000/XP/Vista
Operating Mode Virtual COM

ADAM-4571L

1-port RS-232/422/485 Serial Device Server


Main Features

  • Supports RS-232 serial communication
  • Provides 10/100 Mbps auto-sensing Ethernet port
  • Supports baud rate up to 921.6 kbps
  • Provides COM port redirection (Virtual COM) mode
  • Allows a max. of 5 hosts to access one serial port
  • Supports auto re-connection function
  • Supports Windows 2000/XP/Vista drivers
  • Built-in 15 KV ESD protection for all serial signals
  • Supports remote update firmware
 
Introduction


The ADAM-4571L provides a robust and cost effective way to network-enable equipment in an industrial automation environment. It also brings the advantages of remote management and data accessibility to RS-232 devices. The transmission speed of the ADAM-4571L is up to 921.6 Kbps, meeting the demands for high-speed data exchanges. By encapsulating serial data and transporting it over Ethernet, the ADAM-4571L allows virtual serial links over TCP/IP networks. After Advantech Serial Device Server Configuration Utility installation, standard serial operation calls are transparently redirected to the serial device server, guaranteeing compatibility with legacy serial devices and enabling backward compatibility with existing software. The ADAM-4571L comes with a Windows configuration utility. The configuration tool can auto-detect all serial device servers on the local network, and let you adjust all settings. The configuration utility merges the port mapping function to helps you to setup Virtual COM ports for Windows 2000/XP/Vista(x86) platform. This helps you configure all ports to meet your needs.
Specifications
Part Number ADAM-4571L-CE
Connector Ethernet RJ45
Serial DB9
Ethernet Interface 10/100 Mbps
Ports 1
Serial Ports 1
Type RS-232
Software Baud Rate 50 ~ 921.6 Kbps
Driver Windows 
2000/XP/Vista
Operating Mode Virtual COM

More Articles ...

  1. Serial Device Servers
  2. EKI-1221
  3. EKI-1221D
  4. EKI-1222
Page 7 of 156

Welcome to PAKPLC

35 years of experience in Control Systems

123

We are industrial automation consultants and products supplier. Our products include Programmable Logic Controllers (PLC), HMI, VFD, Servo drives and related control equipment from Siemens (PLC, HMI, VFD), Mitsubishi PLC, Allen Bradley (PLC, HMI) and Omron (PLC, HMI). We also provide signal transmitters and Industrial Communication serial/wireless servers and gateways from Advantech Industrial Communication.

We provide engineering services to various industries, including Pharmaceutical, Chemical, Packaging, Automotive, Textile, Food and Beverage, Battery Manufacturers, Cement and Petrochemical industries. Our services range from complete plant and machinery installation and commissioning service, automation system design, PLC and HMI Programming, field wiring, calibration, start-up tests, upgradation of obsolete controls, troubleshooting, field maintenance and electronic repair of industrial controls.

Our project division is capable of design, commissioning, procurement, and maintenance of turnkey automation projects. We have a versatile software development and system integration experience making us ideal service providers for design and commissioning of DCS and SCADA based systems. We have hands-on experience on SIEMENS PCS7.


Call us

+92-21-35070751
+92-306-2266507

Increased Production

Plant downtime reduction through built-in diagnostics that pinpoint fault location.

Safety Integrated

Ensure plant and personal safety with Fail Safe system approved for application up to SIL 3.

Security Integrated

Intellectual property is safeguarded through integrated knowledge, access,manipulation and password protection features.

Updated tech

Laverage the benefits of latest technology in monitoring and control.

 

 

 

Our services

Installation

Installation and Commissioning

C&M is an ideal partner for installation and commissioning of your new plant or machine

Designing

Designing Services

We are leading Systems Integrator providing integrated engineering solutions, systems and services that address the needs of today.

repair services

Controls Repair

Factory repair, and partial or complete reconditioning of all kinds of electronic control systems.

On Site Troubleshooting

On-Site Troubleshooting

Our field support engineers assist your maintenance staff with troubleshooting, preventive and reactive maintenance tasks.

Retrofit Controls

Retrofit Controls

Evolve, upgrade or migrate to a new generation of hardware and software, and extend the life of your equipment.

Assessment Services

Assessment Services

Safety Assessments help you comply with current and emerging standards by providing consulting services for safety critical controls.

150

Happy clients

200

Projects completed

30

Qualified Employees

2000000

Spare Inventory

Latest projects

  • 1

What we do

We provide industrial automation products, services and consultancy. From breakdown maintenance to turnkey projects our services division is geared for all kinds of automation challenges. Having experience on multiple vendor systems like ABB, Advantech, Allen Bradley, Mitsubishi, Omron, Siemens and Yokogawa, our service engineers can help you restore an old plant or even build a new one!

Why choose us

  • Quality Service

    With siemens automation certified engineers,we ensure that our clients get the best engineering service at an affordable price.

  • Reliable Service

    Because end-user look for more than an equipment supplier.C&M stands by its client over the entire plant lifecycle,delivering professional services to ensure safe,stable and efficient operation.

Our clients

  • 1
  • 2
› ‹