• Address

    C-188, Sector 31-D, P&T Society,

    Korangi Industrial Area,

    Karachi-74900,

    Pakistan

     

  • Call us on

     +92-21-35070751

     +92-300-5776703

  • Mail us @

    info@pakplc.com

     

PCI-1602A

2-port RS-422/485 PCI Communication Card w/Isolation
pci-1602a


Main Features

  • PCI bus specification 2.1 compliant
  • Speeds up to 921.6 kbps
  • 2-port RS-422/485 interface
  • I/O address automatically assigned by PCI Plug & Play
  • OS support: Windows® 98/ME/2000/XP
  • isolation protection for RS-422/485
  • Interrupt status register for increased performance
  • Space reserved for termination resistors
  • Automatic RS-485 data flow control
  • Powerful and easy-to use utility (ICOM Tools)
 
Introduction

PCI-1601 and PCI-1602 are 2 port RS-422/485 PCI communication cards that are compatible with the PCI 2.1 bus specification. Both cards provide two optional isolated and EFTsurge protected RS-422/485 ports, and comes with features such as: high transmission speed of 921.6 kbps, optional EFT Surge & isolation protection, windows utility softwareand more. The cards also come with high-performance 16PCI952 UART with a 128-byte FIFO to reduce CPU load. This makes the PCI-1601 and PCI-1602 especially suitable formultitasking environments. 
PCI-1602 is available with 3,000 VDC optical isolation to protect your PC and equipment against damages from ground loops in harsh environments. To further increase reliability,both boards has EFT surge protection technology, protecting your system from abrupt high voltages up to 2,500 VDC (PCI-1601B and PCI-1602B). Besides, Advantech also providesa convenient utility program called ICOM Tools, to help test the PCI card performance by analyzing the port status. Controlled by easy-to-use menu commands and toolbar buttons,ICOM Tools acts as a PC-based data scope that lets you set a trigger condition, capture the communications data and monitors the signal status. In addition, ICOM Tools is applicableto all series of Advantech ICOM cards.
Specifications
Part Number PCI-1602A-AE
Communication
<br>Interfaces		 CAN -
Current Loop -
RS-232 -
RS-422 V
RS-485 V
Display Ports 2
Network Cable 
Connector 
Type		 N/A
Protection Isolation 3000 VDC
Surge -

 

 

PCI-1602B

2-port RS-422/485 PCI Communication Card w/Isolation and EFT
pci-1602b


Main Features

  • PCI bus specification 2.1 compliant
  • Speeds up to 921.6 kbps
  • 2-port RS-422/485 interface
  • I/O address automatically assigned by PCI Plug & Play
  • OS support: Windows® 98/ME/2000/XP
  • surge protection
  • isolation protection for RS-422/485
  • Interrupt status register for increased performance
  • Space reserved for termination resistors
  • Automatic RS-485 data flow control
  • Powerful and easy-to use utility (ICOM Tools)
 
Introduction

PCI-1601 and PCI-1602 are 2 port RS-422/485 PCI communication cards that are compatible with the PCI 2.1 bus specification. Both cards provide two optional isolated and EFTsurge protected RS-422/485 ports, and comes with features such as: high transmission speed of 921.6 kbps, optional EFT Surge & isolation protection, windows utility softwareand more. The cards also come with high-performance 16PCI952 UART with a 128-byte FIFO to reduce CPU load. This makes the PCI-1601 and PCI-1602 especially suitable formultitasking environments. 
PCI-1602 is available with 3,000 VDC optical isolation to protect your PC and equipment against damages from ground loops in harsh environments. To further increase reliability,both boards has EFT surge protection technology, protecting your system from abrupt high voltages up to 2,500 VDC (PCI-1601B and PCI-1602B). Besides, Advantech also providesa convenient utility program called ICOM Tools, to help test the PCI card performance by analyzing the port status. Controlled by easy-to-use menu commands and toolbar buttons,ICOM Tools acts as a PC-based data scope that lets you set a trigger condition, capture the communications data and monitors the signal status. In addition, ICOM Tools is applicableto all series of Advantech ICOM cards. 
Specifications
Part Number PCI-1602B-AE
Communication
<br>Interfaces		 CAN -
Current Loop -
RS-232 -
RS-422 V
RS-485 V
Display Ports 2
Network Cable 
Connector 
Type		 N/A
Protection Isolation 3000 VDC
Surge 2500 VDC

 

 

PCI-1610A

4-port RS-232 PCI Communication Card (4 DB25)
pci-1610a


Main Features

  • PCI bus specification 2.1 compliant
  • Speeds up to 921.6 Kbps
  • 4-port RS-232
  • 16PCI954 UARTs with 128-byte FIFOs standard
  • I/O address automatically assigned by PCI Plug & Play
  • OS supported: Windows® 98/ME/2000/XP, Linux®
  • Interrupt status register for increased performance
  • Powerful and easy to use Utility (ICOM Tools)
 
Introduction

PCI-1610 is a 4-port RS-232 PCI communication card that is compatible with the PCI 2.1 bus specification. (PCI-1610CU is also compliant with 2.2) and offer transmission speeds up to 921.6 kbps. PCI-1610 also comes with high-performance 16PCI954 UART with a 128-byte FIFO to reduce CPU load. These components make your system more stable and reliable. Thus, the PCI-1610 is especially suitable for multitasking environments. 
PCI-1610CU has a universal PCI connector that is compatible with both the latest 3.3 V signaling systems and the traditional 5V signaling system. This gives high compatibility and allows usage in diverse systems. To further increase reliability, the PCI-1610B and PCI-1610CU offers EFT surge protection technology, protecting your system from abrupt high voltages up to 2,500 VDC. PCI-1610CU also provides 2,500 VDC isolation to protect your PC and equipment against damages from ground loops in harsh environments. 
Advantech also provides a convenient utility program, ICOM Tools, to help test the PCI card performance by analyzing the port status. With menu commands and toolbar buttons, ICOM Tools acts as a PC-based data scope that lets you set a trigger condition, capture the communications data and monitor the signal status. ICOM Tools is applicable to all series of Advantech ICOM cards.
Specifications
Part Number PCI-1610A/9-AE PCI-1610A-AE
Communication
<br>Interfaces		 CAN - -
Current Loop - -
RS-232 V V
RS-422 - -
RS-485 - -
Display Ports 4 4
Network Cable 
Connector 
Type		 DB9 Male DB25 Male
Protection Isolation   -
Surge

-

 -

 

 

PCI-1603

2-port RS-232 Current-loop PCI Communication Card with Isolation Protection
pci-1603


Main Features

  • Two independent RS-232 or Current-loop serial ports
  • Each port can be individually configured to RS-232 or current-loop
  • 16PCI952 FIFO UART (128-byte FIFO)
  • PCI bus specification 2.2 compliant
  • Current-loop: 57.6 kbps RS-232: 50 bps ~ 230.4 kbps Speeds:
  • I/O address automatically assigned by PCI Plug & Play
  • OS supported: Windows® 98/ME/2000/XP/XP Embedded, Linux
  • Interrupt status register for increased performance
  • Powerful and easy-to use utility (ICOM Tools)
  • Universal PCI (Supports 3.3 V or 5 V PCI bus signal)
 
Introduction

PCI-1603 offers a versatile range of high-speed interfacing options. You can switch its ports between the popular RS-232 or noise-resistant current-loop. The card utilizes 16PCI952 UARTs with 128-byte FIFO buffer for faster and more reliable communication, especially under multi-tasking environments such as Windows operating systems. 
The card utilizes 16PCI952 UART that buffers data into packets before sending it to the bus. This drastically reduces CPU load and avoids data loss when the system is busy and cannot process an interrupt quickly. These FIFO buffers make the PCI-1603 especially suitable for high speed serial I/O under Windows.
Specifications
Part Number PCI-1603-BE
Communication
<br>Interfaces		 CAN -
Current Loop V
RS-232 V
RS-422 -
RS-485

-
Display Ports 2
Network Cable 
Connector 
Type		 -
Protection Isolation 3000 VDC
Surge -

 

 

Technical data for failsafe CPUs

SIMATIC S7-300

CPU CPU 315F-2 DP 1) CPU 315F-2 PN/DP CPU 317F-2 DP 1) CPU 317F-2 PN/DP

CPU 319F-3 PN/DP
Dimension (mm) 40 x 125 x 130 80 x 125 x 130 80 x 125 130 120 x 125 x 130
Order No. group: 6ES7 312-6FF. 315-2FH. 317-6FF. 317-2FK. 318-3FL
Memory
RAM 192 KB 256 KB 1 MB

1.4 MB
Instructions 36 K (F instr.) 50 K (F instr.) 20 K (F instructions) 280 K (F onstr.
Processing times
Bit operation 0,1µs 0,05µs 0,01 µs
Word operation 0,2µs 0,2µs 0,02µs
Fixed-point operation 2 µs 0.2 µs 0.02 µs
Floating-point operation 3 µs 1 µs 0.04 µs
Bit memories/timers/counters
Bit memory 2048 bytes 4096 bytes 8182 bytes
S7 timers/counters 256/256 512/512 2048/2048
IEC timers/counters ■ ■ ■
Address areas
I/O (bytes) 2048/2048 8192/8192 8192/8192 8192/8192
I/O Process image 128/128 bytes 256/256 bytes 2048/2048 bytes 2048/2048 bytes
Digital channels (central) 1024 1024 1024 1024
Analog channels (central) 256 256 256 256
DP interface
DP maser systems internally/CP ■/■ ■/■ ■/■
DP slave ■ ■ ■
PROFINET interface
PROFINET CBA   ■   ■ ■
PROFINET IO   ■   ■ ■
TCP/IP   ■   ■ ■
UDP   ■   ■ ■
ISO-on-TCP (RFC 1006)   ■   ■ ■
Web server   ■   ■ ■

Siemens S7-300 PLC

SIMATIC S7-300

A graded CPU range with a wide performance range is available for configuring the controller. Thanks to their high processing speed, the CPUs enable short machine cycle times. The narrow module width results in a compact controller design or a small control cabinet.

The CPUs are available from a width of only 40 mm. Fail-safe CPUs are available for safety-oriented applications. The PROFIsafe profile for safe communication via PROFIBUS and PROFINET allows the integration of safety-related functions into standard automation environments.

Compact CPUs with width of 80 or 120 mm also offer integral I/O and integral technological functions. This onboard I/O (digital/analog) and the technological functions save additional investments in other modules.

Applications include the following:

  • High-speed counting/measuring with direct access to the hardware counter
  • Simple positioning with direct control of the MICROMASTER frequency inverter
  • PID control with integral function block

This range is rounded off by a special technology CPU with powerful technological function, especially for motion control.

Together with the integral digital I/O and equidistant and isochronous mode on PROFIBUS DP, off-the-shelf, PLCopen-compliant motion control of several (even linked) axes.

Micro Memory Card

 

The Micro Memory card is a compact medium that meets the highest industrial requirements, especially ESD protection and mechanical ruggedness.

The system-tested Micro Memory Card Allows more write cycles than conventional memory cards and offers know-how protection because the serial number can be read out.

Version CPU

Isochronous mode on the PROFIBUS

 Integrated interfaces Integral I/O Integrated technological functions
Standard CPUs
  CPU 312, 314 1)   MPI    
CPU 315-2 DP 1)   MPI, DP
CPU 315-2 PN/DP 1)

■

 DP/MPI, PORFINET
CPU 317-2 DP

■

 DP/MPI, DP
CPU 317-2 PN/DP 1)

■

 DP/MPI, PROFINET
  NEW CPU 319-3 PN/DP

■

 DP/MPI, DP, PROFINET
Failsafe CPUs
  CPU 315F-2 DP 1)   MPI, DP   Fail satety with PROFIsafe profile
CPU 315F-2 PN/DP

■

 DP/MPI, PROFINET
CPU 317F-2 DP 1)

■

 DP/MPI, DP
CPU 317F-2 PN/DP

■

 DP/MPI, PROFINET
CPU 319F-3 PN/DP

■

 DP/MPI, DP, PROFINET
Compact CPUs
  CPU 312C 1)   MPI Digital ■ Counting
■ Rules
■ Frequency measurement
■ Pulse width modulation
■ Pulse generator
CPU 313C 1)   MPI Digital, Analog
CPU 313C-2 PtP   MPI, PtP Digital
CPU 313C-2 DP 1)   MPI, DP Digital
CPU 314C-2 PtP 1)   MPI, PtP Digital, Analog

As above, and additionally
■ Positioning
CPU 314C-2 DP 1)   MPI, DP Digital, Analog
Technology CPUs
  CPU 315T-2 DP   DP/MPI, DP(DRIVE) Digital ■ Synchronous operation
■ Traversing to fixed stop
■ Pressure mark correction
■ Cam control
■ Controlled positioning
CPU 317T-2DP   DP/MPI, DP(DRIVE) Digital

Technical specifications Compact CPUs

SIMATIC S7-300

CPU CPU 312C 1) CPU 313C 1) CPU 313-2 PtP CPU 313C-2 DP 1) CPU 314C-2 PtP CPU 314C-2 DP 1)
Dimension (mm) 80 x 125 x 130 120 x 125 x 130 120 x 125 x 130
Required front connector 1 x 40-pin 2 x 40-pin 1 x 40-pin 2 x 40-pin
Order No. group: 6ES7 312-5BE. 313-5BF. 313-6BF. 313-6CF. 314-6BG. 314-6CG.
Memory
RAM 32 KB 64 KB 96 KB
Instructions 10 K 21 K 32 K
Processing times
Bit operation 0,2 µs 0,1 µs 0,1 µs
Word operation/fixed-point./floating-point operat. 0,4/5/6 µs 0,2/2/3 µs 0,2/2/3 µs
Bit memories/timers/counters
Bit memory 128 bytes 256 bytes 256 bytes
S7 timers/counters 128/128 256/256 256/256
IEC timers/counters ■ ■ ■
Address areas
I/O (bytes) 1024/1024 1024/1024 1024/1024 1024/1024
Process I/O image 128/128 bytes 128/128 bytes 128/128 bytes 128/128 bytes
Digital channels (central) 266 1016 1008 1016
Analog channels (central) 64 253 248 253
Integrated functions
Counter (incremental enc.) 2 , 24 V/10 kHz 3 incr.enc., 24 V/30 lHz 4 incr.enc., 24 V/60 kHz
Pulse outputs (PCM) 2 channels, max. 2.5 kHz 3 channels, max. 2.5 kHz

4 channels, max. 2.5 kHz
Frequency measurement 2 channels, max. 10 kHz 2 channels, max. 30 kHz 2 channels, max. 60 kHz
Open-loop positioning     SPB for positioning 1 axis via 2 DO, AO
Integrated "Controlling" FB PID controller PID controller PID controller
Integrated I/O
Digital inputs 10 x 24V DC; all channels can be used for process interrupts 24 x 24V DC; all channels can be used for process interrupts 16 x 24V DC; all channels can be used for process interrupts 24 x 24V DC; all channels can be used for process interrupts
Digital outputs 6 x 24 V DC, 0.5 A 16 x 24 V DC, 0.5 A 16 x 24 V DC, 0.5 A 16 x 24 V DC, 0.5 A
Analog inputs   4: ± 10 V, 0..10 V, ± 20 mA, 0/4..20 mA; 1: 0..600 Ω, PT100     4: ± 10 V, 0..10 V, ± 20 mA, 0/4..20 mA; 1: 0..600 Ω, PT100
Analog output   2: ± 10 V, 0..10 V, ± 20 mA, 0/4..20 mA     2: ± 10 V, 0..10 V, ± 20 mA, 0/4..20 mA
DP interface
DP maser systems int./ CP 342-5 -/n -/n -/n ■/n -/n ■/n
DP slave       ■   ■
PtP interface
Properties     RS485/422   RS485/422  
Protocol driver     3964 (R), RK512, ASCII   3964 (R), RK512, ASCII  

Technical specifications Standard CPUs

SIMATIC S7-300

CPU CPU 312 CPU 314 1)

CPU 315-2 DP 1)

 CPU 315-2 PN/DP 1) CPU 317-2 DP CPU 317-2 PN/DP 1) CPU 319-3 PN/DP
Dimension (mm) 40 x 125 x 130 40 x 125 x 130 80 x 125 x 130 80 x 125 x 130 120 x 125 x 130
Order No. group: 6ES7 312-1AE. 314-1AG. 315-2AG. 315-2EH. 317-2AJ. 317-2EK. 318-EL.
Memory
RAM 32 KB 96 KB 128 KB 256 KB 512 KB 1 MB 1.4 MB
Instructions 10 K 32 K 42 K 84 K 170 K 340 K 470 K
Processing times
Bit operation 0.2 µs 0.1 µs 0.1 µs 0.05 µs 0.01 µs
Word operation 0.4 µs 0.2 µs 0.2µs 0.2µs 0.02 µs
Fixed-point operation 5 µs 2 µs 2 µs 0.2 µs 0.02 µs
Floating-point operation 6 µs 3 µs 3 µs 1 µs 0.04 µs
Bit memories/times/counters
Bit memory 128 bytes 256 bytes 2048 bytes 4096 bytes 8192/8192
S7 timers/counters 128/128 256/256 256/256 512/512 2048/2048
IEC timers/ counters

■

■

■

■

■
Address areas
I/O (bytes) 1024/1024 1024/1024 2048/2048 8192/8192 8192/8192 8192/8192
I/O process image (bytes) 128/128 128/128 128/128 256/256 2048/2048 2048/2048
Digital channels (central) 256 1024 1024 1024 1024 1024
Analog channels (central) 64 256 256 256   256
DP interfaces
DP master system internal / CP 342-5 -/■ ■/■ ■/■ ■/■ ■/■
DP slaves   ■ ■ ■
PROFINET interface
PROFINET CBA     ■ ■ ■
PROFINET IO     ■ ■ ■
TCP/IP     ■ ■ ■
UDP     ■ ■ ■
ISO-on-TCP (RFC 1006)     n ■ ■
Web server     n ■ ■

More Articles...

More Articles ...

  1. Siemens S7-300 PLC
  2. Technical specifications Compact CPUs
  3. Technical specifications Standard CPUs
  4. Construction components
Page 11 of 156

Welcome to PAKPLC

35 years of experience in Control Systems

123

We are industrial automation consultants and products supplier. Our products include Programmable Logic Controllers (PLC), HMI, VFD, Servo drives and related control equipment from Siemens (PLC, HMI, VFD), Mitsubishi PLC, Allen Bradley (PLC, HMI) and Omron (PLC, HMI). We also provide signal transmitters and Industrial Communication serial/wireless servers and gateways from Advantech Industrial Communication.

We provide engineering services to various industries, including Pharmaceutical, Chemical, Packaging, Automotive, Textile, Food and Beverage, Battery Manufacturers, Cement and Petrochemical industries. Our services range from complete plant and machinery installation and commissioning service, automation system design, PLC and HMI Programming, field wiring, calibration, start-up tests, upgradation of obsolete controls, troubleshooting, field maintenance and electronic repair of industrial controls.

Our project division is capable of design, commissioning, procurement, and maintenance of turnkey automation projects. We have a versatile software development and system integration experience making us ideal service providers for design and commissioning of DCS and SCADA based systems. We have hands-on experience on SIEMENS PCS7.


Call us

+92-21-35070751
+92-306-2266507

Increased Production

Plant downtime reduction through built-in diagnostics that pinpoint fault location.

Safety Integrated

Ensure plant and personal safety with Fail Safe system approved for application up to SIL 3.

Security Integrated

Intellectual property is safeguarded through integrated knowledge, access,manipulation and password protection features.

Updated tech

Laverage the benefits of latest technology in monitoring and control.

 

 

 

Our services

Installation

Installation and Commissioning

C&M is an ideal partner for installation and commissioning of your new plant or machine

Designing

Designing Services

We are leading Systems Integrator providing integrated engineering solutions, systems and services that address the needs of today.

repair services

Controls Repair

Factory repair, and partial or complete reconditioning of all kinds of electronic control systems.

On Site Troubleshooting

On-Site Troubleshooting

Our field support engineers assist your maintenance staff with troubleshooting, preventive and reactive maintenance tasks.

Retrofit Controls

Retrofit Controls

Evolve, upgrade or migrate to a new generation of hardware and software, and extend the life of your equipment.

Assessment Services

Assessment Services

Safety Assessments help you comply with current and emerging standards by providing consulting services for safety critical controls.

150

Happy clients

200

Projects completed

30

Qualified Employees

2000000

Spare Inventory

Latest projects

  • 1

What we do

We provide industrial automation products, services and consultancy. From breakdown maintenance to turnkey projects our services division is geared for all kinds of automation challenges. Having experience on multiple vendor systems like ABB, Advantech, Allen Bradley, Mitsubishi, Omron, Siemens and Yokogawa, our service engineers can help you restore an old plant or even build a new one!

Why choose us

  • Quality Service

    With siemens automation certified engineers,we ensure that our clients get the best engineering service at an affordable price.

  • Reliable Service

    Because end-user look for more than an equipment supplier.C&M stands by its client over the entire plant lifecycle,delivering professional services to ensure safe,stable and efficient operation.

Our clients

  • 1
  • 2
› ‹