| 7-ch Thermocouple Input Module with Independent Input Range | ||
 |
|
|
 Datasheet (PDF) |
||
| Introduction | ||
|
ADAM-5018P is a 16-bit, 7-channel thermocouple input module that features programmable independent input ranges on each channel. It accepts millivolt inputs (±15 mV, ±50 mV, ±100 mV, ±500 mV), voltage inputs (±1V, ±2.5 V), current input (±20 mA, 4~20 mA, requires 120 ohms resistor) and thermocouple input (J, K, T, R, S, E, B). The module forwards the data to the host computer in engineering units (mV, V, mA or temperature °C). It also accepts high common mode up to 200 Vdc and has many protections built in, like over voltage, isolation voltage, filter and TVS/ESD function. An external CJC on the plug-in terminal is designed for accurate temperature measurement. |
||
| Specifications | ||
| Part Number | ADAM-5018P-AE | |
| Analog Input | Current Input |
± ±20 mA 20 mA |
| Direct Sensor Input | J, K, T, E, R, S, B |
|
| Input Channels | 7 | |
| Resolution | 16 bits | |
| Sampling Rate | 10 | |
| Voltage Input |
±15 mV ±50 mV ±100 mV ± 500 mV ±1 V ±2.5 V |
|
| Analog Output | Resolution | - |
| Protection | Isolation | 3000 VDC |
| Digital I/O | Digital Input Channel | - |
| Digital Ouput Channel | - | |
-
Address
C-188, Sector 31-D, P&T Society,
Korangi Industrial Area,
Karachi-74900,
Pakistan
-
Call us on
+92-21-35070751
+92-300-5776703
-
ADAM-5024
ADAM-5024
| 4-ch Analog Output Module | ||
 |
|
|
| Datasheet (PDF) |
||
| Introduction | ||
|
The ADAM-5024 is a 4-channel analog output module. It receives the digital input from the ADAM-5000 system or the host computer on RS-485 network. The format of the data is engineering units. It then uses the D/A converter controlled by the system module to convert the digital data into output signals. You can specify slew rates and start up currents through the configuration software. The analog output can also be configured as current or voltage through the software utility. The module protects your equipment from ground loops and power surges by providing optical isolation of the D/A output and transformer based isolation up to 500 VDC. |
||
| Specifications | ||
| Part Number | ADAM-5024-AE | |
| Analog Input | Current Input |
- |
| Direct Sensor Input | - | |
| Input Channels | - | |
| Resolution | - | |
| Sampling Rate | - | |
| Voltage Input |
- | |
| Analog Output | Resolution | 12 bits |
| Protection | Isolation | 3000 VDC |
ADAM-5050
ADAM-5050
| 16-ch Universal Digital I/O Module | ||
 |
|
|
| Datasheet (PDF) |
||
| Introduction | ||
|
The ADAM-5050 features sixteen digital input/output channels. Each channel can be independently configured to be an input or an output channel by the setting of its DIP switch. The digital outputs are open-collector transistor switches that can be controlled from the ADAM-5000. The switches can also be used to control solid-state relays, which in turn can control heaters, pumps and power equipment. The ADAM-5000 can use the module's digital inputs to determine the state of limit or safety switches, or to receive remote digital signals. |
||
| Specifications | ||
| Part Number | ADAM-5050-AE | |
| Communications | Channels | - |
| Type | - | |
| Counter (32-bit) | Channels | - |
| Input Frequency | - | |
| Mode | - | |
| Digital I/O | Digital Input Channel | 16 DIO bit-wise selectable |
| Digital Ouput Channel | 16 DIO bit-wise selectable |
|
ADAM-5024
ADAM-5024
| 4-ch Analog Output Module | ||
|
|
|
| Datasheet (PDF) |
||
| Introduction | ||
|
The ADAM-5024 is a 4-channel analog output module. It receives the digital input from the ADAM-5000 system or the host computer on RS-485 network. The format of the data is engineering units. It then uses the D/A converter controlled by the system module to convert the digital data into output signals. You can specify slew rates and start up currents through the configuration software. The analog output can also be configured as current or voltage through the software utility. The module protects your equipment from ground loops and power surges by providing optical isolation of the D/A output and transformer based isolation up to 500 VDC. |
||
| Specifications | ||
| Part Number | ADAM-5024-AE | |
| Analog Input | Current Input |
- |
| Direct Sensor Input | - | |
| Input Channels | - | |
| Resolution | - | |
| Sampling Rate | - | |
| Voltage Input |
- | |
| Analog Output | Resolution | 12 bits |
| Protection | Isolation | 3000 VDC |
ADAM-5051
ADAM-5051
| 16-ch Digital Input Modules | ||
 |
|
|
| Introduction | ||
|
The ADAM-5051 provides sixteen digital input channels. The ADAM-5000 system can use the module's digital inputs to determine the state of limit or safety switches or to receive remote digital signals. |
||
| Specifications | ||
| Part Number | ADAM-5051-AE | |
| Communications | Channels | - |
| Type | - | |
| Counter (32-bit) | Channels | - |
| Input Frequency | - | |
| Mode | - | |
| Digital I/O | Digital Input Channel | 16 16w/LED |
| Digital Ouput Channel | - | |
More Articles ...
Welcome to PAKPLC
35 years of experience in Control Systems
We are industrial automation consultants and products supplier. Our products include Programmable Logic Controllers (PLC), HMI, VFD, Servo drives and related control equipment from Siemens (PLC, HMI, VFD), Mitsubishi PLC, Allen Bradley (PLC, HMI) and Omron (PLC, HMI). We also provide signal transmitters and Industrial Communication serial/wireless servers and gateways from Advantech Industrial Communication.
We provide engineering services to various industries, including Pharmaceutical, Chemical, Packaging, Automotive, Textile, Food and Beverage, Battery Manufacturers, Cement and Petrochemical industries. Our services range from complete plant and machinery installation and commissioning service, automation system design, PLC and HMI Programming, field wiring, calibration, start-up tests, upgradation of obsolete controls, troubleshooting, field maintenance and electronic repair of industrial controls.
Our project division is capable of design, commissioning, procurement, and maintenance of turnkey automation projects. We have a versatile software development and system integration experience making us ideal service providers for design and commissioning of DCS and SCADA based systems. We have hands-on experience on SIEMENS PCS7.
Call us
+92-21-35070751
+92-306-2266507
Increased Production
Plant downtime reduction through built-in diagnostics that pinpoint fault location.
Safety Integrated
Ensure plant and personal safety with Fail Safe system approved for application up to SIL 3.
Security Integrated
Intellectual property is safeguarded through integrated knowledge, access,manipulation and password protection features.
Updated tech
Laverage the benefits of latest technology in monitoring and control.
Our services
Installation and Commissioning
C&M is an ideal partner for installation and commissioning of your new plant or machine
Designing Services
We are leading Systems Integrator providing integrated engineering solutions, systems and services that address the needs of today.
Controls Repair
Factory repair, and partial or complete reconditioning of all kinds of electronic control systems.
On-Site Troubleshooting
Our field support engineers assist your maintenance staff with troubleshooting, preventive and reactive maintenance tasks.
Retrofit Controls
Evolve, upgrade or migrate to a new generation of hardware and software, and extend the life of your equipment.
Assessment Services
Safety Assessments help you comply with current and emerging standards by providing consulting services for safety critical controls.
150
Happy clients
200
Projects completed
30
Qualified Employees
2000000
Spare Inventory
What we do
We provide industrial automation products, services and consultancy. From breakdown maintenance to turnkey projects our services division is geared for all kinds of automation challenges. Having experience on multiple vendor systems like ABB, Advantech, Allen Bradley, Mitsubishi, Omron, Siemens and Yokogawa, our service engineers can help you restore an old plant or even build a new one!
Why choose us
-
Quality Service
With siemens automation certified engineers,we ensure that our clients get the best engineering service at an affordable price.
-
Reliable Service
Because end-user look for more than an equipment supplier.C&M stands by its client over the entire plant lifecycle,delivering professional services to ensure safe,stable and efficient operation.
Our clients
- 1
- 2
›
‹