• Address

    C-188, Sector 31-D, P&T Society,

    Korangi Industrial Area,

    Karachi-74900,

    Pakistan

     

  • Call us on

     +92-21-35070751

     +92-300-5776703

  • Mail us @

    info@pakplc.com

     

ADAM-5030

2-slot SD Storage Module


Main Features

  • Storage Type: SD (Secure Digital Card)
  • USB Type: USB Rev 2.0 (Compliant)
  • USB Number: 2, SD Card Number: 2
  • Max Storage: 1GB x 2
  • Interface: PCI Bus
  • Format: FAT-16
  • Operating Temperature: 0 ~ 60° C (32 ~ 140° F)
  Datasheet (PDF)
Introduction

ADAM-5030 is a 2-slot secure digital card storage module that provides 2 USB ports and 2 SD slots. It is fully compliant with USB 2.0 and FAT16 and is also low power consuming, at only 0.5W. According the volume of SD Card, you can extend the memory of your controller up 2 GB. Unlike commercial modules, it is very rugged, and has a very long lifecycle.

Specifications
Part Number ADAM-5030-AE
Control System Supported Controller ADAM-5550KW
General Connectors N/A
Wiring Board -
Storage Channel 2
Size 2 GB (Max)
Type SD (Secure Digital Card)
USB Channel +10 ~ +30 VDC 2
Type V2.0 (compliant)

ADAM-5202

2-port AMONet Master Module


Main Features

  • Communication Slave: 2 Rings with Max. 128 (1 Ring with 64 slaves) Module Number
  • Communication: Max. 100 m (20 Mbps/32 slave modules) or 50 m (20 Mbps/64 slave modules) Distance
  • Serial Interface: Half duplex RS-485 with transformer isolation
  • Surge Protection: 10 kV
  • Transmission Speed: 2.5, 5, 10 or 20 Mbps with automatic data flow control
  • Remote motion and remote IO function
  • LED Indictors: Active, Error (Each Port)
  • Operating Temperature: 0 ~ 50° C (32 ~ 140° F)
  Datasheet (PDF)
Introduction

ADAM-5202 is a 2-ring AMONet module that provides 128 maximum slaves and supports 100-meter long distance communications. The transmission speed can support 2.5, 5, 10 or 20 Mbps with automatic data flow control. It accepts half duplex RS-485 serial interfaces with transformer isolation. This module can also function as a motion module for AMONet Master Control.

Specifications
Part Number ADAM-5202-AE
Control System Supported Controller ADAM-5550KW
General Connectors 2 x RJ45
Wiring Board AMAX-3752F, AMAX-3754F, 
AMAX-3756F
Storage Channel -
Size -
Type -
USB Channel -
Type -

PWR-242

DIN-rail Power Supply


Main Features

  • Input short protection
  • Output overload protection
  • Operation temperature: 0~50 ℃
  Datasheet 
Introduction

DIN-Rail Power Supply

ADAM-5240

4-axis Stepping/Pulse-type Servo Motor Control Module


Main Features

  • High-speed 4-axis stepping/pulse-type servo motion control
  • Hand wheel and jog function
  • 2/3-axis linear interpolation function
  • 2-axis circular interpolation function
  • Continuous interpolation function
  • Programmable T/S-curve acceleration/deceleration rate
  • Up to 4 MPPS output for each axis
  • Two pulse output types: CW/CCW or Pulse/Direction
  • Up to 1 MHz encoder input for each axis
  • Two encoder pulse input types: A/B phase or Up/Down
  • Position management and software limit switch function
  Datasheet (PDF)
Introduction

Advantech's Industrial Automation Group introduces the ADAM-5240, a 4-axis Stepping/Pulse-type Servo Motor Control Module for use with ADAM-5550 Series PACs (Programmable Automation Controllers). ADAM-5240 is is fully integrated to fulfill general purpose motion applications. Equipped with high speed 4-axis motion control module that simplifies stepping and pulse-type servo motor control, ADAM-5240 provides advanced performance.

Specifications
Part Number ADAM-5240-AE
Control System Supported Controller ADAM-5550KW
General Connectors 100-pin SCSI-II
Wiring Board ADAM-3952, ADAM-3952J2S
Storage Channel -
Size -
Type -
USB Channel -
Type -

Welcome to PAKPLC

35 years of experience in Control Systems

123

We are industrial automation consultants and products supplier. Our products include Programmable Logic Controllers (PLC), HMI, VFD, Servo drives and related control equipment from Siemens (PLC, HMI, VFD), Mitsubishi PLC, Allen Bradley (PLC, HMI) and Omron (PLC, HMI). We also provide signal transmitters and Industrial Communication serial/wireless servers and gateways from Advantech Industrial Communication.

We provide engineering services to various industries, including Pharmaceutical, Chemical, Packaging, Automotive, Textile, Food and Beverage, Battery Manufacturers, Cement and Petrochemical industries. Our services range from complete plant and machinery installation and commissioning service, automation system design, PLC and HMI Programming, field wiring, calibration, start-up tests, upgradation of obsolete controls, troubleshooting, field maintenance and electronic repair of industrial controls.

Our project division is capable of design, commissioning, procurement, and maintenance of turnkey automation projects. We have a versatile software development and system integration experience making us ideal service providers for design and commissioning of DCS and SCADA based systems. We have hands-on experience on SIEMENS PCS7.


Call us

+92-21-35070751
+92-306-2266507

Increased Production

Plant downtime reduction through built-in diagnostics that pinpoint fault location.

Safety Integrated

Ensure plant and personal safety with Fail Safe system approved for application up to SIL 3.

Security Integrated

Intellectual property is safeguarded through integrated knowledge, access,manipulation and password protection features.

Updated tech

Laverage the benefits of latest technology in monitoring and control.

 

 

 

Our services

Installation

Installation and Commissioning

C&M is an ideal partner for installation and commissioning of your new plant or machine

Designing

Designing Services

We are leading Systems Integrator providing integrated engineering solutions, systems and services that address the needs of today.

repair services

Controls Repair

Factory repair, and partial or complete reconditioning of all kinds of electronic control systems.

On Site Troubleshooting

On-Site Troubleshooting

Our field support engineers assist your maintenance staff with troubleshooting, preventive and reactive maintenance tasks.

Retrofit Controls

Retrofit Controls

Evolve, upgrade or migrate to a new generation of hardware and software, and extend the life of your equipment.

Assessment Services

Assessment Services

Safety Assessments help you comply with current and emerging standards by providing consulting services for safety critical controls.

150

Happy clients

200

Projects completed

30

Qualified Employees

2000000

Spare Inventory

What we do

We provide industrial automation products, services and consultancy. From breakdown maintenance to turnkey projects our services division is geared for all kinds of automation challenges. Having experience on multiple vendor systems like ABB, Advantech, Allen Bradley, Mitsubishi, Omron, Siemens and Yokogawa, our service engineers can help you restore an old plant or even build a new one!

Why choose us

  • Quality Service

    With siemens automation certified engineers,we ensure that our clients get the best engineering service at an affordable price.

  • Reliable Service

    Because end-user look for more than an equipment supplier.C&M stands by its client over the entire plant lifecycle,delivering professional services to ensure safe,stable and efficient operation.

Our clients

  • 1
  • 2