Mitsubishi

Address

C-188, Sector 31-D, P&T Society,

Korangi Industrial Area,

Karachi-74900,

Pakistan
Call us on

+92-21-35070751

+92-300-5776703
Mail us @

info@pakplc.com

ADAM-6520L

ADAM-6520L

5-port Industrial 10/100 Mpbs Unmanaged Ethernet Switch
		Main Features Supports full/half duplex flow control Supports MDI/MDI-X auto crossover Provides broadcast storm protection Embedded with a switch controller, supports auto-negotiation Supports +10~30 VDC for power input Provides surge protection 3,000 VDC for power line Provides flexible mounting: DIN-rail, Wall, Stack

Introduction
ADAM-6520L is a 5-port Industrial 10/100 Mbps Unmanaged Ethernet Switch, which substitutes ADAM-6510, which is being phased-out. With ADAM-6520L, users can upgrade their 10 Mbps hub to a 10/100 Mbps switch, for a small cost.
Specifications
Part Number		ADAM- 6520L-AE
General	Ethernet Connectors	5 x RJ-45
	Mounting	DIN 35 rail, Wall, Stack
I/O	Transmission Distance	Ethernet up to 100 m
	Transmission Speed	UP to 100 Mbps
Operating System	Operating Temperature	0 ~ 60°C (32 ~ 140°F) Stack: 0~ 50°C (32 ~ 122°F)
Power Supply	Power Connector	2-pin removable screw terminal
	Power Input	1 x Unregulated 10 ~ 30 VDC

ADAM-6521

ADAM-6521

Industrial Ethernet Switch with 4 x 10/100Base-TX Ports & 1 Multi-mode SC Type Fiber Optic Port
		Main Features Provides 4 x 10/100 Mbps Ethernet ports with RJ-45 connector Provides 1 x 100 Mbps multi/single-mode fiber port with SC/ST connector Supports full/half duplex flow control Supports Integrated Loop-up engine Supports MDI/MDI-X auto crossover Provides broadcast storm protection Supports +10 ~ 30 VDC voltage power input Provides surge (EFT) protection 3,000 VDC for power line Supports 4,000 VDC Ethernet ESD protection Provides flexible mounting: DIN-rail, Wall, Stack Supports operating temperatures from -10 ~ 65° C

Introduction
The ADAM-6521 is an industrial-grade Ethernet hub for infrastructure networking solution in industrial Automation environment. It allows users to cost-effectively expand their industrial network with ease. The ADAM-6521 consists of one fiber optic and four RJ-45 ports. With fiber optic, you can prevent noise interference from the system and transmission distance up to 2 km. The design is focused on industrial-grade reliability and stability. Thus, the ADAM-6521 is especially suited for industrial environments with Ethernet networking needs, e.g. semi-conductor factories, inventory control environments, assembly lines, production and more.
Specifications
Part Number		ADAM-6521-BE
General	Ethernet Connectors	4 x RJ-45 + 1 x SC type fiber connector
	Mounting	DIN 35 rail, Wall, Stack
I/O	Transmission Distance	Ethernet up to 100 m, Fiber up to 2 km
	Transmission Speed	UP to 100 Mbps
Operating System	Operating Temperature	-10 ~ 70°C (14 ~ 158°F) I21 Stack: -10~ 60°C (-40 ~ 140°F)
Power Supply	Power Connector	2-pin removable screw terminal
	Power Input	1 x Unregulated 10 ~ 30 VDC

ADAM-6521/ST

ADAM-6521/ST

Industrial Ethernet Switch with 4 x 10/100Base-TX Ports & 1 Multi-mode ST Type Fiber Optic Port
		Main Features Provides 4 x 10/100 Mbps Ethernet ports with RJ-45 connector Provides 1 x 100 Mbps multi/single-mode fiber port with ST connector Supports full/half duplex flow control Supports Integrated Loop-up engine Supports MDI/MDI-X auto crossover Provides broadcast storm protection Supports +10 ~ 30 VDC voltage power input Provides surge protection (EFT) 3,000 VDC for power line Supports 4,000 VDC Ethernet ESD protection Provides flexible mounting: DIN-rail, panel, piggyback Supports operating temperatures from -10 ~ 65° C

Introduction
ADAM-6521/ST is an industrial-grade Ethernet switch with a fiber optic port that makes it possible to expand industrial networks fast and cost-effectively. ADAM-6521/ST has 1 fiber port and 4-RJ-45 ports. With fiber optics, you can prevent noise interfering with your system and implement transmission distances up to 15 km. ADAM-6521/ST supports a wide voltage range of +10 ~ 30 VDC over the terminal block, and 3,000 VDC surge protection (EFT) to protect it from being damaged by over-voltage. A wide operating temperature range from -10 to 65° C (14 ~ 149° F), makes it functional in harsh operating environments. Six inclusive LED indicators make troubleshooting easier. Each port has a pair of LEDs that indicate link status and transmission speed. This function conveniently informs users of any collisions, the link status, power failure and data receipts for immediate on-site diagnostics.
Specifications
Part Number		ADAM-6521/ST-AE
General	Ethernet Connectors	1 x ST type fiber connector
	Mounting	DIN 35 rail, Wall, Stack
I/O	Transmission Distance	Ethernet up to 100 m, Fiber up to 2 km
	Transmission Speed	UP to 100 Mbps
Operating System	Operating Temperature	-10 ~ 70°C (14 ~ 158°F) I21 Stack: -10~ 60°C (-40 ~ 140°F)
Power Supply	Power Connector	2-pin removable screw terminal
	Power Input	1 x Unregulated 10 ~ 30 VDC

ADAM-6521S

ADAM-6521S

Industrial Switch with 4 10/100 Mbps Ethernet Port & 1 Single-mode Fiber Port
		Main Features Provides 4 x 10/100 Mbps Ethernet ports with RJ-45 connector Provides 1 x 100 Mbps multi/single-mode fiber port with SC connector Supports full/half duplex flow control Supports MDI/MDI-X auto crossover Provides broadcast storm protection Embedded with a switch controller, supports auto-negotiation Embedded with the memory buffer, supports store-and-forward transmission Support +10 ~ 30 VDC voltage Provides surge protection 3000 VDC for power line Provides flexible mountings: DIN-rail, panel, piggyback Supports operating temperature: -10 ~ 65°C

Introduction
ADAM-652S1 is an industrial-grade Ethernet switch and single-mode fiber converter. It is designed to help extend an Ethernet network up to 15 km through areas with electrical noise interference. ADAM-6521 has one fiber optic and four RJ-45 ports. With single-mode fiber transmission, you can prevent noise interference and achieve transmission distances up to 15 km. Thus, ADAM-6521S is especially suitable for industrial environments with long-distance Ethernet networking needs, e.g. warehouses, transportation, environmental monitoring, and many more.
Specifications
Part Number		ADAM-6521S-AE
General	Ethernet Connectors	4 x RJ-45 + 1 x SC type fiber connector
	Mounting	DIN 35 rail, Wall, Stack
I/O	Transmission Distance	Ethernet up to 100 m, Fiber up to 15 km
	Transmission Speed	UP to 100 Mbps
Operating System	Operating Temperature	-10 ~ 70°C (14 ~ 158°F) I21 Stack: -10~ 60°C (-40 ~ 140°F)
Power Supply	Power Connector	2-pin removable screw terminal
	Power Input	1 x Unregulated 10 ~ 30 VDC

ADAM-6541

ADAM-6541

Ethernet to Multi-mode Fiber Optic Converter
		Main Features Supports 1-port 100 Mbps multimode fi ber optics Supports 10 ~30 VDC power input Easily mounted on a DIN-rail, panel or piggyback Supports full/half-duplex fl ow control. Supports MDI/MDIX auto crossover. Embedded with a switch controller, supports auto-negotiation. Embedded with memory buffer, supports store and forward transmission.

Introduction
The ADAM-6541 is an industrial grade converter which is designed to convert Ethernet network (10/100Base-TX) to fiber network (100Base-FX). It transparently converts Ethernet signals into optic signals. The advantages of fiber optics are wide bandwidth, anti-EMI and suitable for long-distance transmission. Therefore, the ADAM-6541 is an ideal solution for "fiber to building" application at central offices or local sites.
Specifications
Part Number		ADAM- 6541-AE
General	Ethernet Connectors	1 x RJ-45 1 x SC type fiber connector
	Mounting	IP30, ABS+PC with solid mounting kits
I/O	Transmission Distance	Ethernet: Up to 100 m Fiber:Multi-mode: Up to 2 km Single-mode: Up to 20km
	Transmission Speed	UP to 100 Mbps
Operating System	Operating Temperature	0 ~ 60°C (32 ~ 140°F) Stack: 0~ 50°C (32 ~ 122°F)
Power Supply	Power Connector	2-pin removable screw terminal
	Power Input	1 x Unregulated 10 ~ 30 VDC

More Articles ...

Page 65 of 156

MITSUBISHI

Mitsubishi Factory Automation offers the following Programmable Logic Controllers:

Q Series

Q series

Fx Series

Fx series

A Series

A series