Mitsubishi

Address

C-188, Sector 31-D, P&T Society,

Korangi Industrial Area,

Karachi-74900,

Pakistan
Call us on

+92-21-35070751

+92-300-5776703
Mail us @

info@pakplc.com

ADAM-6541/ST

ADAM-6541/ST

10/100Base-TX Ethernet to 100Base-FX Multi-mode ST Type Fiber Optic Converter
		Main Features Supports full/half duplex flow control Supports Integrated Loop-up engine Supports MDI/MDI-X auto crossover Provides broadcast storm protection Supports +10 ~ 30 VDC voltage power input Provides surge protection (EFT) 3,000 VDC for power line Provides flexible mounting: DIN-rail, panel, piggyback Supports operating temperatures from -10 ~ 65° C Embedded a switch controller-supports auto-negotiation Embedded a memory buffer-supports store and forward transmission

Introduction
ADAM-6541/ST is an industrial-grade converter designed to convert Ethernet networks to fiber networks. It does so by transparently converting Ethernet signals to optic signals. The advantages of fiber optics are wide bandwidth, EMI immunity and long-distance transmission capability. Therefore, ADAM-6541/ST are ideal solution for “fiber to building” applications at central offices or local sites. ADAM-6541/ST supports MDI/MDIX auto detection, so you don't need to use crossover wires. It also includes a switch controller that can sense the transmission speed (10/100 Mbps) automatically. Both the Ethernet port and the fiber port have memory buffers that support store-and-forward mechanisms. This assures data cane be transmitted properly. ADAM-6541/ST is extremely compact and can be mounted in three different ways: DIN-rail, panel and piggyback. ADAM-6541 and ADAM-6542 can operate from -10 ~ 65° C and accept a wide voltage range from +10 ~ 30 VDC. Besides, it also provides 3,000VDC surge protection (EFT) against over-voltage so it is suitable for harsh operating environments.
Specifications
Part Number		ADAM-6541/ST-AE
General	Ethernet Connectors	1 x ST type fiber connector
	Mounting	IP30, ABS+PC with solid mounting kits
I/O	Transmission Distance	Ethernet: Up to 100 m Fiber:Multi-mode: Up to 2 km Single-mode: Up to 20km
	Transmission Speed	UP to 100 Mbps
Operating System	Operating Temperature	0 ~ 60°C (32 ~ 140°F) Stack: 0~ 50°C (32 ~ 122°F)
Power Supply	Power Connector	2-pin removable screw terminal
	Power Input	1 x Unregulated 10 ~ 30 VDC

EKI-6528TI

EKI-6528TI

EN50155 8-port M12 Unmanaged Switch with Wide Temperature
		Main Features Auto Bypass between Port 1 and Port 2 EN50155 certified Backplane (Switching Fabric): 1.6 Gbps Wide redundant power design 8-port 10/100Mbps M12 type connector with IP-40 protection Dual redundant power input Supports wide operating temperature (-40~ 75° C) Certifications EN50155

Introduction
EKI-6528TI and EKI-6528TPI are EN50155 certified industrial switches with IP40 protection and wide temperature support designed for railway applications. EKI-6528TPI provides 4 x PoE ports that support IEEE 802.3af and can provide up to 15.4 watts of power per port. M12 connectors ensure highly reliable connectivity for industrial communication applications. With IP40 compact metal housings, these switches are protected against dusty environments and are a good fit for many industrial applications. Under no-power condition, 'Auto Bypass' function ensures the Ethernet signal connection through internal circuitry. This feature provides non-stop communication to rolling stocks even no power exists in some of the carriages.
Specifications
Part Number		EKI-6528TI-AE
Communications	LAN	10/100Base-T(X)
Communications	Transmission Speed	Up to 100Mbps
Environment	Operating Temperature	-40 ~ 75° C (-40 ~ 167° F)
General	Certifications	CE/FCC
	Ethernet Connectors	-
	Mounting	DIN-rail, Wallmount
I/O	Transmission Distance	Ethernet : Up to 100m
I/O	Transmission Speed	UP to 100 Mbps
Interface	Ethernet	M12, 4-pole D-coded, Female x 8
Mechanism	Dimensions (W x H x D)	92 x 180 x 42 mm
	Enclosure	IP40 protected metal shell
	Mounting	DIN-rail, Wall mount
Operating System	Operating Temperature	-40 ~ 75°C (-40 ~ 167°F)
Power Supply	Power Connector	M12, 5-pole A-coded, male x 1
Power Supply	Power Input	12~ 48 VDC, redundant dual inputs
Protection	Power Reverse	Present

EKI-6558TI

EKI-6558TI

EN50155 IP67 8-port M12 Managed Ethernet Switch with Wide Temperature
		Main Features EN50155 certified Backplane (Switching Fabric): 2 Gbps Supports X-Ring function (ultra high-speed recovery time <10ms) Wide redundant power design Provides M12 connector with IP67 protection Provides Waterproof fiber optic connector TFTP firmware updates and system configure restore and backup Dual 12 ~ 48 VDC power input and 1 relay output Supports wide operating temperature -40~ 75° C Provides 100Mbps LC type connector Certifications EN50155

Introduction
EKI-6558TI and EKI-6559TMI are EN50155 certified IP67 wide temperature industrial switches which are especially designed for railway industry and harsh environments. M12 connectors secure highly reliable connectivity for industrial communication applications. EN50155 certification ensures the use of railway application. EKI-6559TMI also provides two additional fiber optic ports to extend communication range. Both EKI-6558TI and EKI-6559TMI provide Advantech's X-Ring protocol, which enables users to establish a redundant Ethernet network with ultra high-speed recovery (less than 10ms). They also support advanced network standards to optimize network performance, reduce maintenance cost, and secure network safety.
Specifications
Part Number		EKI-6558TI-AE
Communication	LAN	10/100Base-T(X)
	Standard	IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3af
	Transmisssion Speed	Up to 100Mbps
Environment	Operating Temperature	-40 ~ 75° C (-40 ~ 167° F)
Environment	Storage Temperature	- 40 ~ 85° C (-40 ~185° F)
General	Certifications	CE/FCC, UL 508
Interface	Ethernet	M12, 4-pole D-coded, Female x 8
Mechanism	Dimensions (W x H x D)	192 x 176 x 62.5 mm
	Enclosure	IP67 protected metal shell
	Mounting	Wall mount
Power	P-Fail Connector	M12, 8-pole A-coded, Female x 1
	P-Fail Output	1A @ 24 VDC
	Power Connector	M12, 5-pole A-coded, male x 1
	Power Consumption	3.36W max. @ 48VDC
	Power Input	12 ~ 48 VDC, redundant dual inputs
Protection	Power Reverse	Present

EKI-6528TPI

EKI-6528TPI

EN50155 8-port M12 Unmanaged PoE Switch with Wide Temperature
		Main Features Auto Bypass between Port 1 and Port 2 EN50155 certified Backplane (Switching Fabric): 1.6 Gbps Wide redundant power design 4-port PoE type M12 Dual redundant power input Supports wide operating temperature (-40~ 75° C) Certifications EN50155

Introduction
EKI-6528TI and EKI-6528TPI are EN50155 certified industrial switches with IP40 protection and wide temperature support designed for railway applications. EKI-6528TPI provides 4 x PoE ports that support IEEE 802.3af and can provide up to 15.4 watts of power per port. M12 connectors ensure highly reliable connectivity for industrial communication applications. With IP40 compact metal housings, these switches are protected against dusty environments and are a good fit for many industrial applications. Under no-power condition, 'Auto Bypass' function ensures the Ethernet signal connection through internal circuitry. This feature provides non-stop communication to rolling stocks even no power exists in some of the carriages.
Specifications
Part Number		EKI-6528TPI-AE
General	Certifications	CE/FCC
	Ethernet Connectors	-
	Mounting	DIN-rail, Wallmount
I/O	Transmission Distance	Ethernet : Up to 100m
I/O	Transmission Speed	UP to 100 Mbps
Operating System	Operating Temperature	-40 ~ 75°C (-40 ~ 167°F)
Power Supply	Power Connector	M12, 5-pole A-coded, male x 1
Power Supply	Power Input	24 ~ 48 VDC, redundant dual inputs
Protection	Power Reverse	Present
Interface	Ethernet	M12, 4-pole D-coded, Female x 8
Communications	LAN	10/100Base-T(X)
Communications	Transmission Speed	Up to 100Mbps
Environment	Operating Temperature	-40 ~ 75° C (-40 ~ 167° F)
Mechanism	Dimensions (W x H x D)	92 x 180 x 42 mm
	Enclosure	IP40 protected metal shell
	Mounting	DIN-rail, Wall mount

EKI-6559TMI

EKI-6559TMI

EN50155 IP67 8-port M12 + 2-port Fiber Optic Managed Ethernet Switch with Wide Temperature
		Main Features EN50155 certified Backplane (Switching Fabric): 2 Gbps Supports X-Ring function (ultra high-speed recovery time <10ms) Wide redundant power design Provides M12 connector with IP67 protection Provides Waterproof fiber optic connector TFTP firmware updates and system configure restore and backup Dual 12 ~ 48 VDC power input and 1 relay output Supports wide operating temperature -40~ 75° C Provides 100Mbps LC type connector Certifications EN50155

Introduction
EKI-6558TI and EKI-6559TMI are EN50155 certified IP67 wide temperature industrial switches which are especially designed for railway industry and harsh environments. M12 connectors secure highly reliable connectivity for industrial communication applications. EN50155 certification ensures the use of railway application. EKI-6559TMI also provides two additional fiber optic ports to extend communication range. Both EKI-6558TI and EKI-6559TMI provide Advantech's X-Ring protocol, which enables users to establish a redundant Ethernet network with ultra high-speed recovery (less than 10ms). They also support advanced network standards to optimize network performance, reduce maintenance cost, and secure network safety.
Specifications
Part Number		EKI-6559TMI-AE
Communications	LAN	10/100Base-T(X)
	Standard	IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3af
	Transmission Speed	Up to 100Mbps
Environment	Operating Temperature	-40 ~ 75° C (-40 ~ 167° F)
Environment	Storage Temperature	- 40 ~ 85° C (-40 ~185° F)
General	Certifications	CE/FCC, UL 508
Interface	Transmission Distance	Ethernet : Up to 100m
Interface	Transmission Speed	UP to 100 Mbps
Interface	Ethernet	M12, 4-pole D-coded, Female x 8
Mechanism	Dimensions (W x H x D)	192 x 176 x 62.5 mm
	Enclosure	IP67 protected metal shell
	Mounting	Wall mount
Power	P-Fail Connector	M12, 8-pole A-coded, Female x 1
	P-Fail Output	1A @ 24 VDC
	Power Connector	M12, 5-pole A-coded, male x 1
	Power Consumption	3.36W max. @ 48VDC
	Power Input	12 ~ 48 VDC, redundant dual inputs
Protection	Power Reverse	Present

More Articles ...

Page 66 of 156

MITSUBISHI

Mitsubishi Factory Automation offers the following Programmable Logic Controllers:

Q Series

Q series

Fx Series

Fx series

A Series

A series