Home

APAX-5070

Modbus/TCP Communication Coupler
		Main Features Support Modbus/TCP protocol which can be connected with Modbus/TCP master Dynamic configuration allows users to configure multiple inputs functions in one module Two RJ-45 ports with the same IP address for building daisy chains Flexible Modbus address mapping either automatically or manually Able to connect to APAX digital I/O modules (max. 768 points) or analog I/O modules (max.192 points) With 16 sets of onboard alarm which can be enabled by utility without any programming

Introduction
The APAX-5070 is a high-density Modbus/TPC remote I/O solution that allows any PC, controller, or HMI device that supports Modbus/TCP protocol to easily and cost-effectively add remote I/O functionality to access data and perform read and write actions. By leveraging the Advantech APAX product line features such as, high density I/O, flexibility, scalability, and hot swap functionality, users can build remote I/O systems to fulfill PLC or control application needs.
Specifications
Part Number		APAX-5070-AE
Communications	Analog Signals	512 (max.)
	Connected I/O Modules	32 (max.)*
	Data Transfer Rates	10/100 Mbps
	Digital Signals	2048 (max.)
	Protocol	Modbus/TCP
General	Connectors	2 x RJ-45 (2-channel switch, share same IP address)
	Description	Modbus/TCP Communication Coupler
	Operating Temperature	-10 ~ 60°C (when mounted vertically)
	Relative Humidity	5 ~ 95% (non-condensing)
	Storage Temperature	-40 ~ 70°C
	Topology	Line or star wiring

APAX-5071

PROFINET Communication Coupler
		Main Features 2 x RJ-45 (2-channel switch, share same IP address) Connector PROFINET Communication Couple

Introduction
PROFINET Communication Coupler
Specifications
Part Number		APAX-5071-AE
Communications	Analog Signals	512 (max.)
	Connected I/O Modules	32 (max.)*
	Data Transfer Rates	100 Mbps
	Digital Signals	2048 (max.)
	Protocol	Mo PROFINET RT, DCP, DHCP, TCP/UDP, DNS, SNTP, ICMP dbus/TCP
General	Connectors	2 x RJ-45 (2-channel switch, share same IP address)
	Description	PROFINET Communication Coupler*
	Operating Temperature	-10 ~ 60°C (when mounted vertically)
	Relative Humidity	5 ~ 95% (non-condensing)
	Storage Temperature	-40 ~ 70°C
	Topology	Line or star wiring

APAX-5090P

4-port RS-232/422/485 Communication Module
		Main Features Four COM ports for APAX controller with PCI interface COM1, COM2: RS-422/485 COM3, COM4: RS-232/422/485 Baud rate: 50 bps ~ 230.4 kbps 15 kV ESD protection 2500 VDC EFT protection 2500 VDC isolation protection (between COM ports and backplane)

Introduction
4-port RS-232/422/485 Communication Module
Specifications
Part Number		APAX-5072-AE
General	Certifications	CE, FCC class A
	Interface	COM 1, COM 2: RS-422/485, COM 3, COM 4: RS-232/422/485
	Connectors	1 x 26-pin clamp-type terminal
	Dimensions (W x H x D)	30 x 139 x 100 mm
	Enclosure	ABS+PC
	Weight	180 g
	Power Consumption	2 W @ 5 VDC (typical)
Communications	Data Bits	5, 6, 7, 8
	Stop Bits	1, 1.5, 2
	Parity	None, even, odd
	Baud Rate	50 bps ~ 230.4 kbps
	Baud Rate	RS-232: TxD, RxD, RTS, CTS, GND RS-422: Tx+, Tx-, Rx+, RX- RS-485: Data+, Data-
	FIFO	128 bytes
	Flow Control	RTS/CTS, Xon/Xoff
Enviroment	Operating Temperature	0 ~ 60° C (mounted vertically)
	Storage Temperature	-40 ~ 70° C
	Relative Humidity	5 ~ 95% (non-condensing)
Protection	ESD Protection	15 kV
	EFT Protection	2,500 VDC
	Isolation Protection	2,500 VDC (between COM port and backplane)

APAX-5072

EtherNet/IP Communication Coupler
		Main Features Get ODVA (Open DeviceNet Vendors Association ) authorized conformance certification Support Ethernet/IP protocol which can be connected with Ethernet/IP master Dynamic configuration allows users to configure different channels with different type and range in one module Two RJ-45 ports with the same IP address for building daisy chains, saving IP address used and installation cost Able to connect to APAX digital I/O modules (max. 768 points) or analog I/O modules (max.192 points) Easily create L5K I/O configuration file by utility and leverage it within application software

Introduction
The APAX-5072 is a high-density Ethernet/IP remote I/O solution that allows any PC, controller, or HMI device that supports Ethernet/IP protocol to easily and cost-effectively add remote I/O functionality to access data and perform read and write actions. By leveraging the Advantech APAX product line features such as, high density I/O, flexibility, scalability, and hot swap functionality, users can build remote I/O systems to fulfill PLC or control application needs.
Specifications
Part Number		APAX-5072-AE
Communications	Analog Signals	512 (max.)
	Connected I/O Modules	32 (max.)*
	Data Transfer Rates	10/100 Mbps
	Digital Signals	2048 (max.)
	Protocol	Ethernet/IP
General	Connectors	2 x RJ-45 (2-channel switch, share same IP address)
	Description	Ethernet/IP Communication Coupler
	Operating Temperature	-10 ~ 55°C (when mounted vertically)
	Relative Humidity	5 ~ 95% (non-condensing)
	Storage Temperature	-40 ~ 70°C
	Topology	Line or star wiring

APAX-5095P

2-port CANopen Communication Module
		Main Features 2500 VDC isolation protection Supports PDO transmission mode Supports NMT and SDO communication object Supports Heartbeat producer and consumer Supports Emergency objects

Introduction
2-port CANopen Communication Module
Specifications
Part Number		APAX-5095P-AE
Communications	Protocol	CANopen
Communications	Speed	Max. 1 Mbits/s
Environment	Operating Temperature	1 x 26-pin clamp-type terminal
	Relative Humidity	30 x 139 x 100 mm
	Storage Temperature	ABS+PC
General	Certifications	CE, FCC class A
	Connectors	DB9
	Dimensions (W x H x D)	30 x 139 x 100 mm
	Enclosure	ABS+PC
	Interface	2 x CAN Bus
	Power Consumption	2 W @ 5 VDC (typical)
	Weight	180 g
Protection	Isolation Protection	2,500 VDC