Home

APAX-5046

24-ch Digital Output Module
		Main Features Voltage Range: 8 ~ 35 VDC Short circuit protection Thermal shutdown protection Each digital channel has its own status LED Isolation between channels and backplane

Introduction
APAX-5046 modules offer 24 digital output channels. Their output channels can generate discrete signal to external devices and change its output value to control the external devices.
Specifications
Part Number		APAX-5046-AE
Digital Input/Output	DI/O Channels	24 x DO (Sink)
	Over Voltage Protection	-
	Rated Current	0.5 A
	Rated Load Voltage	24 VDC
	Short Circuit Protection	Yes
	Thermal Shutdown Protection	Yes
General	Description	24-ch DI/O Modules

APAX-5060

12-ch Relay Output Module
		Main Features Relay type: Form A (SPST) Contact Rating: 5 A @ 250 VAC, 5 A @ 30 VDC Each digital channel has its own status LED Isolation between channels and backplane bus

Introduction
APAX-5060 modules offer 12 relay output channels. Their output channels can be used for switching devices, or to control on-off status of external devices
Specifications
Part Number		APAX-5060-A1E
Digital Input/Output	DI/O Channels	12 x Relay (Form A, SPST)
	Over Voltage Protection	-
	Rated Current	5 A
	Rated Load Voltage	250 VAC, 30 VDC
	Short Circuit Protection	-
	Thermal Shutdown Protection	-
General	Description	12-ch Relay Modules

Advantech APAX-5000 backplane modules are designed to connect APAX modules in a flexible and convenient way. The APAX backplane modules, APAX-5001 and APAX-5002, are in accordance with 1-slot and 2-slot backplanes for different connecting requirements. Furthermore, APAX-5002 is equipped with an RJ-45 port which can support flexible remote control architectures.

Product
Model Number		Description
APAX-5001		1-slot Backplane Module

APAX-5002		2-slot Backplane Module

APAX-5080

4/8-ch High Speed Counter Module
		Main Features Supports multiple operating modes: (1) Up mode (2) Up/Down mode (3) Pulse/Direction mode (4) A/B Phase mode (5) Frequency mode 4 or 8 counter channels depends on operating modes 32-bit counter range with 1 bit overflow/underflow 1 MHz counter frequency 4 digital input channels with counter gate functionality 4 digital output channels with counter alarm output functionality Over voltage, short circuit and thermal protection design 2500 VDC isolation protection (between channels and backplane)

Introduction
Advantech's APAX-5080 Counter Module features up to eight channels and hot-swappable functionality. With its 4/8 counter channels, the APAX-5080 is capable of simultaneously taking counts from multiple sources using any of its five operating modes ( UP, UP/Down, Frequency, Pulse/Direction, and A/B Phase modes), therefore saving hardware installation costs and having greater scalability. The flexibility of the APAX-5080 is enhanced with the additional benefit of four DI counter gates to define when a counter is enabled, and four DO alarm output channels triggered by a specific counter value; so that the APAX-5080 can be configured to send an alarm message when certain criteria are met.
Specifications
Part Number		APAX-5080-AE
General	Certifications	CE, FCC class A
	Dimensions (W x H x D)	30 x 139 x 100 mm
	Enclosure	ABS+PC
	Weight	170 g
	Power Consumption	2.5 W @ 24 VDC (typical)
	Status Display	LED per channel (for DI, DO channel)
Counter/Frequency Input	Channels and Mode	8 (Up and Frequency mode), 4 (Pulse/Direction, Up/Down, A/B phase mode)
	Counting Range	32-bit + 1-bit overflow/ underflow
	Minimum Pulse Width	1 µs
	Counter Frequency	1 MHz (max.)
	Input Voltage	For "0" signal: 0 ~ 3 VDC, For "1" signal: 10 ~ 30 VDC
Digital Input	Channles	4
	Type	Source Load
	Input Voltage	For "0" signal: 0 ~ 3 VDC, For "1" signal: 10 ~ 30 VDC
Digital Output	Channels	4 (Sink Type)
	Output Voltage Range	8 ~ 35 VDC
	Rated Output Current	0.5 A (per channel)
Environment	Operating Temperature	-10 ~ 60° C (when mounted vertically
	Storage Temperature	-40 ~ 70°C
	Relative Humidity	5 ~ 95% (non-condensing)

APAX-5001

1-slot Backplane Module
		Main Features One slot for one APAX-5000 modules Combines with APAX-5002 backplane to satisfy installation requirements Supports both DIN-rail and wall mounting Hot swap mechanism for all APAX I/O modules 30G shock resistance and 2Grms vibration resistance

Introduction
Similar as APAX-5002, APAX-5001 modules are backplane modules, offering communication and power to APAX-5000 I/O modules inserted on it. APAX-5001 always serves as the last backplane when module number is odd.
Specifications
Part Number		APAX-5001-AE
General	Description	1-slot Backplane Module
	Expansion Port	-
	Mounting	DIN-rail, Wall (Panel)
	Power Input	18 ~ 30 VDC
	Slot Number	1