• Address

    C-188, Sector 31-D, P&T Society,

    Korangi Industrial Area,

    Karachi-74900,

    Pakistan

     

  • Call us on

     +92-21-35070751

     +92-300-5776703

  • Mail us @

    info@pakplc.com

     

APAX-5202P

4-port RS-232/422/485 Communication Module


Main Features

  • Max. 20 Mbps transfer rate
  • 2 x independent AMONet RS-485 master rings
  • Max. 128 AMONet RS-485 slave modules supported
  • Easy installation with RJ45 phone jack and LED diagnostic
  • KW Multiprog software programming support
 
Introduction

APAX-5202P is a PCI interface card which supports two AMONet RS-485 master rings, and transfers data between host and slaves directly without any operations in between. Each ring can control up to 2,048 I/O points, 256 axes, or a combination of I/O points and axes for motion control. The ring can support up to 20 Mbps transfer rate and a maximum communication distance of up to 100 meters. The communication between master and slave is based on a customized RS-485 solution that saves wires, covers a long distance, supports high-speed communication and has time-deterministic features. The communication interface between master and PAC is accomplished by memory mapping. Various functions can be chosen on the slave modules, and standard industrial DIN-rail mounting design makes it easy to distribute them in the field. The master collects information from slave modules and publishes the information to its PAC controller.

 

 

Analog I/O Modules

Advantech APAX-5000 analog input/output modules offer channel-independent configuration, signal type selection (AI has 12 channels and AO has 8 channels), sensor wiring burn-out detection , hot swap functionality and can be easily configured for different types and ranges of input/output to support versatile applications using the same utility software. Advantech's analog input/output modules provide reliable functionality to satisfy your various needs.

Product
Model Number Description
  8-ch RTD Module
 
  12-ch Analog Input Module
 
  12-ch High Speed Analog Input Module
 
  12-ch Thermocouple Input Module
 
  8-ch Analog Output Module

 

 

APAX-5017

12-ch Analog Input Module


Main Features

  • 12-ch voltage and current input
  • Range: ±150mV, ±500mV, ±1V, ±5V, ±10V, ±20mA, 0~20mA, 4~20 mA
  • 2500 VDC over voltage protection
  • Input characteristic curve according to IEC 61131, type 1
  • Isolation between channels and backplane
 
Introduction

APAX-5017 modules offer analog input channels for voltage and current signal measurement. Users can configure each channel with different input type and measurement range.

Specifications
Part Number APAX-5017-AE
Analog Input AI Channels 12
Current Input ±20 mA 
0 ~ 20mA 
4 ~ 20mA
Direct Sensor Input -
Input Type V, mV, mA
Resolution 16 bits
Sampling Rate 12 (Total)
Voltage Input ±150 mV 
±500 mV 
±1 V 
±5 V 
±10 V
General Description 12-ch AI Modules

 

 

APAX-5013

8-ch RTD Module


Main Features

  • Wire Burn-out Detection
  • High Density Channel design, total 8 channels
 
Introduction

APAX-5013 modules offer analog input channels for voltage and current signal measurement. Users can configure each channel with different input type and measurement range.

Specifications
Part Number APAX-5070-AE
Analog Input AI Channels 8
Current Input -
Direct Sensor Input RTD 
(Pt-100, Pt-200, Pt-500, 
Pt-1000, Balo, Ni 518)
Input Type RTD (2-wire or 3-wire)
Resolution 16 bits
Sampling Rate 10 (Total**)
Voltage Input -

 

 

APAX-5017H

12-ch High Speed Analog Input Module


Main Features

  • 12 analog input channels (12-bit, 1000 sample/second per channel)
  • Supports various input types: 0 ~ 500 mV, ±10 V, 0 ~ 10 V, 0 ~ 20 mA, 4 ~20 mA
  • Each input channel can be configured with different input types and range
  • 2500 VDC optical isolation between channels and backplane bus
  • ±35 VDC over voltage protection
  • Wire burnout detection for 4~20 mA current input
 
Introduction

APAX-5017H is a 12-ch high speed analog input module that provides programmable input ranges on each channel. It offers a high sampling rate with up to 1000 samples a second per channel. This high performance analog input module features high density I/O with a flexible topology and hot-swappable functionality.

Specifications
Part Number APAX-5017H-AE
Analog Input AI Channels 12
Input Type V, mV, mA
Resolution 12 bits
Current Input ±0.2% or better of Full Scale Range
Voltage Input ±0.1% or better of Full Scale
Sampling Rate 1,000 sample/second (per channel)
Direct Sensor Input -

 

 

Welcome to PAKPLC

35 years of experience in Control Systems

123

We are industrial automation consultants and products supplier. Our products include Programmable Logic Controllers (PLC), HMI, VFD, Servo drives and related control equipment from Siemens (PLC, HMI, VFD), Mitsubishi PLC, Allen Bradley (PLC, HMI) and Omron (PLC, HMI). We also provide signal transmitters and Industrial Communication serial/wireless servers and gateways from Advantech Industrial Communication.

We provide engineering services to various industries, including Pharmaceutical, Chemical, Packaging, Automotive, Textile, Food and Beverage, Battery Manufacturers, Cement and Petrochemical industries. Our services range from complete plant and machinery installation and commissioning service, automation system design, PLC and HMI Programming, field wiring, calibration, start-up tests, upgradation of obsolete controls, troubleshooting, field maintenance and electronic repair of industrial controls.

Our project division is capable of design, commissioning, procurement, and maintenance of turnkey automation projects. We have a versatile software development and system integration experience making us ideal service providers for design and commissioning of DCS and SCADA based systems. We have hands-on experience on SIEMENS PCS7.


Call us

+92-21-35070751
+92-306-2266507

Increased Production

Plant downtime reduction through built-in diagnostics that pinpoint fault location.

Safety Integrated

Ensure plant and personal safety with Fail Safe system approved for application up to SIL 3.

Security Integrated

Intellectual property is safeguarded through integrated knowledge, access,manipulation and password protection features.

Updated tech

Laverage the benefits of latest technology in monitoring and control.

 

 

 

Our services

Installation

Installation and Commissioning

C&M is an ideal partner for installation and commissioning of your new plant or machine

Designing

Designing Services

We are leading Systems Integrator providing integrated engineering solutions, systems and services that address the needs of today.

repair services

Controls Repair

Factory repair, and partial or complete reconditioning of all kinds of electronic control systems.

On Site Troubleshooting

On-Site Troubleshooting

Our field support engineers assist your maintenance staff with troubleshooting, preventive and reactive maintenance tasks.

Retrofit Controls

Retrofit Controls

Evolve, upgrade or migrate to a new generation of hardware and software, and extend the life of your equipment.

Assessment Services

Assessment Services

Safety Assessments help you comply with current and emerging standards by providing consulting services for safety critical controls.

150

Happy clients

200

Projects completed

30

Qualified Employees

2000000

Spare Inventory

What we do

We provide industrial automation products, services and consultancy. From breakdown maintenance to turnkey projects our services division is geared for all kinds of automation challenges. Having experience on multiple vendor systems like ABB, Advantech, Allen Bradley, Mitsubishi, Omron, Siemens and Yokogawa, our service engineers can help you restore an old plant or even build a new one!

Why choose us

  • Quality Service

    With siemens automation certified engineers,we ensure that our clients get the best engineering service at an affordable price.

  • Reliable Service

    Because end-user look for more than an equipment supplier.C&M stands by its client over the entire plant lifecycle,delivering professional services to ensure safe,stable and efficient operation.

Our clients

  • 1
  • 2