• Address

    C-188, Sector 31-D, P&T Society,

    Korangi Industrial Area,

    Karachi-74900,

    Pakistan

     

  • Call us on

     +92-21-35070751

     +92-300-5776703

  • Mail us @

    info@pakplc.com

     

APAX-5018

12-ch Thermocouple Input Module


Main Features

  • Isolation between channels and backplane
  • Supports wire burn-out detection functionality (4 ~ 20 mA and Thermocouple)
  • Range: ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V, ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA
  • Supports configurable input channels with different input type and range
  • High density 12-ch analog input solution for reading thermocouple sensor data
 
Introduction

12-ch Thermocouple Module

Specifications
Part Number APAX-5018-AE
Analog Input AI Channels 12
Current Input ±20 mA 
0 ~ 20mA 
4 ~ 20mA
Direct Sensor Input J, K, T, E, R , S, B 
Thermocouple
Input Type V, mV, mA, 
Thermocouple
Resolution 16 bits
Sampling Rate 12 (Total**)
Voltage Input ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V

 

 

APAX-5028

8-ch Analog Output Module


Main Features

  • 8-ch voltage and current output
  • Range: ±2.5 V, ±5 V, ±10 V, 0~2.5 V, 0~5 V, 0~10 V, 0~20 mA, 4~20 mA
  • Resolution: 14-bit
  • Short Circuit Protection
  • Isolation between channels and backplane
 
Introduction

8-ch Analog Output Module

Specifications
Part Number APAX-5028-AE
Analog Input AI Channels 8
Current Output 0 - 20 mA, 
4 - 20 mA
Output Type V, mA
Resolution 14 bits
Slew Rate 0.7 VDC/µs 
(per channel)
Voltage Output ±2.5 mV, ±5 V, ±10 V, 0 ~ 2.5 mV, 0 ~ 5 V, 0 ~ 10 V
General Description 8-ch AO Modules

 

 

APAX-5040

24-ch Digital Input Module


Main Features

  • Supports both sink and source type input
  • Rated voltage input value: 24 VDC
  • ±70 VDC over voltage protection
  • Input characteristic curve according to IEC 61131, type 1
  • Each digital channel has its own status LED
  • Isolation between channels and backplane
 
Introduction

APAX-5040 modules offer 24 digital input channels. Their input channels can accept 2-wiring inputs from a DC voltage source, to determine the state of limits, standard switches or proximity switches.

Specifications
Part Number APAX-5040-AE
Digital Input/Output DI/O Channels 24 x DI (Sink/Source)
Over Voltage 
Protection
Yes
Rated Current 3 mA
Rated Load Voltage 24 VDC
Short Circuit 
Protection
-
Thermal Shutdown Protection -
General Description 24-ch DI Modules

 

Digital I/O Modules

Advantech APAX-5000 digital input/output modules are equipped with high density 24 channels, isolation, shirt circuit protection , failure protection functions and hot swap functionality to increase the utilization rate of the module and provide a reliable system.

Product
Model Number Description
  24-ch Digital Input Module
 
  24-ch Digital Input/Output Module
 
  24-ch Digital Output Module
 
  12-ch Relay Output Module
 
  4/8-ch High Speed Counter Module

 

APAX-5045

24-ch Digital Input/Output Module


Main Features

  • 12 DI channels and 12 DO channels
  • ±70 VDC over voltage protection for DI channels
  • Short circuit and thermal shutdown protection
  • Input characteristic curve according to IEC 61131, type 1
  • Each digital channel has its own status LED
  • Isolation between channels and backplane
 
Introduction

APAX-5045 modules provide excellent flexibility by offering both digital input and output channels. DI channels can accept 2-wiring inputs from a DC voltage source, to determine the state of limits, standard switches or proximity switches, and DO channels can generate discrete signal to external devices and change its output value to control the external devices.

Specifications
Part Number APAX-5045-AE
Digital Input/Output DI/O Channels 12 x DI (Sink/Source) 
12 x DO (Sink)
Over Voltage 
Protection
Yes 
(DI channels)
Rated Current DI: 3 mA 
DO: 0.5 A
Rated Load Voltage 24 VDC
Short Circuit 
Protection
Yes (DO channels)
Thermal Shutdown Protection Yes (DO channels)
General Description 24-ch DI/O Modules

Welcome to PAKPLC

35 years of experience in Control Systems

123

We are industrial automation consultants and products supplier. Our products include Programmable Logic Controllers (PLC), HMI, VFD, Servo drives and related control equipment from Siemens (PLC, HMI, VFD), Mitsubishi PLC, Allen Bradley (PLC, HMI) and Omron (PLC, HMI). We also provide signal transmitters and Industrial Communication serial/wireless servers and gateways from Advantech Industrial Communication.

We provide engineering services to various industries, including Pharmaceutical, Chemical, Packaging, Automotive, Textile, Food and Beverage, Battery Manufacturers, Cement and Petrochemical industries. Our services range from complete plant and machinery installation and commissioning service, automation system design, PLC and HMI Programming, field wiring, calibration, start-up tests, upgradation of obsolete controls, troubleshooting, field maintenance and electronic repair of industrial controls.

Our project division is capable of design, commissioning, procurement, and maintenance of turnkey automation projects. We have a versatile software development and system integration experience making us ideal service providers for design and commissioning of DCS and SCADA based systems. We have hands-on experience on SIEMENS PCS7.


Call us

+92-21-35070751
+92-306-2266507

Increased Production

Plant downtime reduction through built-in diagnostics that pinpoint fault location.

Safety Integrated

Ensure plant and personal safety with Fail Safe system approved for application up to SIL 3.

Security Integrated

Intellectual property is safeguarded through integrated knowledge, access,manipulation and password protection features.

Updated tech

Laverage the benefits of latest technology in monitoring and control.

 

 

 

Our services

Installation

Installation and Commissioning

C&M is an ideal partner for installation and commissioning of your new plant or machine

Designing

Designing Services

We are leading Systems Integrator providing integrated engineering solutions, systems and services that address the needs of today.

repair services

Controls Repair

Factory repair, and partial or complete reconditioning of all kinds of electronic control systems.

On Site Troubleshooting

On-Site Troubleshooting

Our field support engineers assist your maintenance staff with troubleshooting, preventive and reactive maintenance tasks.

Retrofit Controls

Retrofit Controls

Evolve, upgrade or migrate to a new generation of hardware and software, and extend the life of your equipment.

Assessment Services

Assessment Services

Safety Assessments help you comply with current and emerging standards by providing consulting services for safety critical controls.

150

Happy clients

200

Projects completed

30

Qualified Employees

2000000

Spare Inventory

What we do

We provide industrial automation products, services and consultancy. From breakdown maintenance to turnkey projects our services division is geared for all kinds of automation challenges. Having experience on multiple vendor systems like ABB, Advantech, Allen Bradley, Mitsubishi, Omron, Siemens and Yokogawa, our service engineers can help you restore an old plant or even build a new one!

Why choose us

  • Quality Service

    With siemens automation certified engineers,we ensure that our clients get the best engineering service at an affordable price.

  • Reliable Service

    Because end-user look for more than an equipment supplier.C&M stands by its client over the entire plant lifecycle,delivering professional services to ensure safe,stable and efficient operation.

Our clients

  • 1
  • 2